Schneider Electric USA Website

Welcome to our website.

To view product availability in a specific country, select from the country list below. For Investor Relations, please visit our global site.

Choose another country or region

    • Operators in power station control room working with technical challenges, sustainability reporting.

      Predictive Maintenance Solutions

    • Read

      • Read more about Schneider Electric solutions

        White Paper
        Predictive Maintenance Strategy for Building Operations: A Better Approach

        This paper shows how a proactive, predictive maintenance approach coupled with analytics can reduce a building’s maintenance and energy costs by up to 20%. The pros and cons of different approaches to maintenance are discussed. Download the white paper
      • Read more about Schneider Electric solutions

        Optimizing Buildings Using Analytics and Engineering Expertise

        Building Management Systems (BMS) offer facility managers many advantages. Leveraging BMS data through analytic software and combining it with expert engineering services creates actionable intelligence that can reduce energy costs by up to 30%. Download the white paper to read more
      • Read more about Schneider Electric solutions

        Schneider Electric Seneca Plant

        Leading by example to eliminate energy waste, the company’s manufacturing facility in Seneca, South Carolina used Schneider Electric Building Analytics managed service to fine-tune its operations while reaping the energy-saving benefits. Case Study: Schneider Electric Seneca Plant
      • Read more about Schneider Electric solutions

        Guideform Specification: Automated Monitoring Based Commissioning Section [25 08 01] [13811]

        AUTOMATED MONITORING BASED COMMISSIONING SYSTEMS
        Scope: Provide labor, material, equipment, related services, and supervision required, including, but not limited to, manufacturing, fabrication, erection, and installation for automated monitoring based commissioning (AMBCx) systems as required for the complete performance of the work, and as shown on the Drawings and as herein specified.
        The work specified in this includes, but shall not be limited to, the following:
        1. The AMBCx provider shall ensure that data sufficiency conditions of this Section are met. This shall require coordination with the Energy Monitoring and Control Systems (EMCS) Contractor (if different). 
        2. The requirements of this Section apply to all EMCS elements of [Division 25 - IntegratedAutomation] [Section 13800 - Building Automation and Control].
        Read more: Guideform Specification: Automated Monitoring Based Commissioning Section [25 08 01] [13811]
      • Read more about Schneider Electric solutions

        Fault detection in a research laboratory ventilation system

        In the fall of 2010, monitoring services were provided for a 450,000 square-foot research laboratory in the greater Boston area. The five-year-old facility was equipped with state-of-the-art energy efficient HVAC systems, including 10 ventilation units with capacity exceeding 50,000 CFM and several hundred variable air volume (VAV) boxes, to serve a mix of laboratory, office, and educational space. Building Analytics provides facility teams with continuous system fault detection to automatically evaluate and organize the condition of equipment. This information enables proactive building maintenance while ensuring persistent energy efficiency, which could result in significant ongoing energy and cost savings. Case Study: Fault detection in a research laboratory ventilation system
      • Read more about Schneider Electric solutions

        Commissioning rooftop units in a community center

        Building Analytics diagnostics and reporting were deployed to provide ongoing commissioning on newly installed rooftop units at a one-story community center housing offices, a gymnasium, and community rooms. Five RTUs were connected to the cloud-based system for monitoring and diagnostics. Almost immediately, several problems with RTU scheduling, compressor cycling, and simultaneous heating and cooling demands were found leading to controls adjustments to reduce energy consumption and costs. Case Study: Commissioning rooftop units in a community center
      • Read more about Schneider Electric solutions

        Facilitating utility incentives: Monitoring and verification at a multi-tenant office tower

        This multi-tenant office building deployed Building Analytics diagnostics and reporting to help discover efficiency opportunities, and to facilitate participation in the Massachusetts Pay for Performance (P4P) utility incentive program. Building Analytics diagnostics were used on the central air handlers, chilled water loop, and hot water loop. The building’s management committed to six low-cost energy conservation measures (ECM) for pre-ECM and post-ECM monitoring in order to prove the energy savings targeted in their P4P project application. Other equipment issues found by Building Analytics diagnostics are being corrected as they occur. Case Study: Facilitating utility incentives: Monitoring and verification at a multi-tenant office tower
      • Read more about Schneider Electric solutions

        How Recommissioning Saves Energy in Buildings
        White Paper

        This paper reviews how recommissioning can result in energy savings of 5 to 15% with a typical payback of less than 2 years. How Recommissioning Saves Energy in Buildings
      • Read more about Schneider Electric solutions

        Boston Scientific
        White Paper

        Boston Scientific, a worldwide developer, manufacturer, and marketer of medical devices, opened a new corporate headquarters and integrated Schneider Electric Building Analytics as part of a strategic initiative to reduce energy waste and work toward creating a more sustainable corporate campus. Boston Scientific Case Study
    • Watch

      • Introducing EcoStruxure™ Building Advisor

        Real Impact on Operating Costs, Occupant Comfort and Asset Value