green square flush illuminated pushbutton head Ø16 latching for integral LEDShow more characteristics >
Product availabilityNon-Stock - Not normally stocked in distribution facility
Main range of productHarmony XB6 product or component typeHead for illuminated push-button product compatibilityIntegral LED device short nameZB6 bezel materialPlastic mounting diameter0.63 in (16 mm) sale per indivisible quantity1 shape of signaling unit headSquare type of operatorLatching operator profileGreen flush unmarked Complementary CAD overall width0.71 in (18 mm) CAD overall height0.71 in (18 mm) CAD overall depth1.3 in (33 mm) product weight0.04 lb(US) (0.016 kg) resistance to high pressure washer1015.26 psi (7000000 Pa) at 131 °F (55 °C),distance: 0.1 m mechanical durability300000 cycles Environment protective treatmentTC ambient air temperature for storage-40...158 °F (-40...70 °C) ambient air temperature for operation-13...158 °F (-25...70 °C) electrical shock protection classClass II conforming to IEC 61140 IP degree of protectionIP65 conforming to IEC 60529 NEMA degree of protectionNEMA 4 conforming to CSA C22.2 No 94NEMA 13 conforming to CSA C22.2 No 94NEMA 4X conforming to CSA C22.2 No 94NEMA 13 conforming to UL 50NEMA 4 conforming to UL 50NEMA 4X conforming to UL 50 standardsCSA C22.2 No 14EN/IEC 60947-5-1JIS C 4520EN/IEC 60947-5-5JIS C 852UL 508EN/IEC 60947-1 product certificationsCSAGOSTCCCUL vibration resistance+/- 3 mm (f = 2...500 Hz) conforming to IEC 60068-2-65 gn (f = 2...500 Hz) conforming to IEC 60068-2-6 shock resistance30 gn (duration = 18 ms) half sine wave acceleration conforming to IEC 60068-2-2750 gn (duration = 11 ms) half sine wave acceleration conforming to IEC 60068-2-27 Ordering and shipping details Category22459 - PUSHBUTTONS, 16MM Discount ScheduleCS2 GTIN00785901361435 Nbr. of units in pkg.1 Package weight(Lbs)0.10000000000000001 ReturnabilityN Country of originES Offer Sustainability California proposition 65WARNING: This product can expose you to chemicals including: - - - - - - - Substance 1Nickel compounds, which is known to the State of California to cause cancer, and - - - - - - - Substance 2Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. - - - - - - - More informationFor more information go to www.p65warnings.ca.gov Contractual warranty Warranty period18 months
Documents and DownloadsLanguage
CatalogSizeAdd to My DocumentsDigest 178 Catalog 19: Push Buttons and Operator Interface (Version 1.0)CADSizeAdd to My DocumentsHead\pushbutton\Flush square - ZB6CA... (Version 1.0)CAD for ZB6CF3: green square flush illuminated pushbutton head Ø16 latching for integral LED (Version 1.0)CertificateSizeAdd to My Documents
No results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Dimensions DrawingsSquare Head for Illuminated or Non Illuminated PushbuttonDimensions
Mounting and ClearancePanel Cut-outFor Square or Circular HeadPushbuttons, Switches and Pilot Lights for Printed Circuit Board ConnectionFront Panel Cut-out (Viewed from Installer’s Side)Printed Circuit Board Drillings (Viewed from Electrical Block Side)A24 mm/0.94 in. minimum for rectangular heads, 18 mm/0.71 in. minimum for square or circular headsB18 mm/0.71 in. minimum(1)6 x Ø 1.1 mm / 6 x Ø 0.04 in. holes.(2)1 x Ø 2.60-0.2 mm / 1 x Ø 0.100--0.008 in. hole for locating pin, only when using socket adaptor ZB6Y010.(3)1 x Ø 3.20-0.2 mm / 1 x Ø 0.130-0.008 in. hole for fixing of printed circuit board onto the front panel using body bracket ZB6Y011. This hole must be drilled on the left-hand side, when heads are positioned at the normal angle. Fit a body bracket ZB6Y011 every 72 mm/2.83 in. maximum for cut-outs on 24 mm/0.94 in. centres (rectangular heads) and 54 mm/2.13 in. maximum for cut-outs on 18 mm/0.71 in. centres (square or circular heads).
General tolerances of the panel and printed circuit board: T1, T2: T1 + T2 = 0.3 mm/0.01 in. maximum.
Thickness of printed circuit board: 1.6 mm/0.06 in. minimum.Mounting with Body Bracket
With socket adaptor ZB6Y010(1)Head(2)Nut(3)Body(4)Body bracket(5)Contact block(6)Socket adaptor(7)Panel(8)Printed circuit
Direct mounting without socket adaptor ZB6Y010(1)Head(2)Nut(3)Body(4)Body bracket(5)Contact block(6)Panel(7)Printed circuit