light block with body/fixing collar with BA9s incandesc. bulb 400VShow more characteristics >
Main range of productHarmony XB4 product or component typeComplete body/light block assembly device short nameZB4 fixing collar materialZamak sale per indivisible quantity1 connections - terminalsFaston connector(1 x 6.35 mm) light sourceIncandescent bulb baseBA 9s light block supplyVia integral transformer, 1.2 VA - 6 V [Us] rated supply voltage400 V AC, 50/60 Hz Complementary CAD overall width1.18 in (30 mm) CAD overall height1.85 in (47 mm) CAD overall depth2.36 in (60 mm) terminals description ISO n°1(X1-X2)PL [Ui] rated insulation voltage250 V (degree of pollution: 3) conforming to EN 60947-1 [Uimp] rated impulse withstand voltage4 kV conforming to EN 60947-1 signalling typeSteady mounting of blockFront mounting electrical composition codeP4 Environment protective treatmentTH ambient air temperature for storage-40...158 °F (-40...70 °C) ambient air temperature for operation-40...131 °F (-40...55 °C) electrical shock protection classClass I conforming to IEC 60536 IP degree of protectionIP20 standardsEN/IEC 60947-1EN/IEC 60947-5-1EN/IEC 60947-5-4EN/IEC 60947-5-5JIS C 4520UL 508CSA C22.2 No 14 product certificationsCSAUL listed vibration resistance5 gn (f = 2...500 Hz) conforming to IEC 60068-2-6 shock resistance30 gn (duration = 18 ms) half sine wave acceleration conforming to IEC 60068-2-27 Offer Sustainability California proposition 65WARNING: This product can expose you to chemicals including: - - - - - - - Substance 1Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. - - - - - - - More informationFor more information go to www.p65warnings.ca.gov Contractual warranty Warranty period18 months
Documents and DownloadsLanguage
No results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Mounting and ClearancePanel Cut-out for Pushbuttons, Switches and Pilot Lights (Finished Holes, Ready for Installation)
Connection by Screw Clamp Terminals or Plug-in Connectors or on Printed Circuit Board
Connection by Faston Connectors(1)Diameter on finished panel or support(2)40 mm min. / 1.57 in. min.(3)30 mm min. / 1.18 in. min.(4)Ø 22.5 mm / 0.89 in. recommended (Ø 22.3 mm 0+0.4 / 0.88 in. 0+0.016)(5)45 mm min. / 1.78 in. min.(6)32 mm min. / 1.26 in. min.