View all OsiSense XS & XT
inductive sensor XS7 40x40x117 - plastic - Sn15mm - 12..48VDC - terminalsShow more characteristics
Discontinued on 30 June 2014
End-of-service on 30 September 2014
XS7C40PC440XS7C40PC440 has not been replaced. Please contact your customer care center for more information.
* Price is “List Price” and may be subject to a trade discount – check with your local distributor or retailer for actual price.
Add to My Products Remove from My Products
The maximum number of products that can be compared is 4
Main range of productOsiSense XS series nameGeneral purpose sensor typeInductive proximity sensor device application- sensor nameXS7 sensor designForm 40 x 40 x 117 size117 mm body typeFixed detector flush mounting acceptanceFlush mountable materialPlastic enclosure materialPlastic type of output signalDiscrete wiring technique4-wire [Sn] nominal sensing distance0.59 in (15 mm) discrete output function1 NO + 1 NC output circuit typeDC discrete output typePNP electrical connectionScrew-clamp terminals, 4 x 1.5 mm² [Us] rated supply voltage12...48 V DC reverse polarity protection switching capacity in mA<= 200 mA overload and short-circuit protection IP degree of protectionIP67 IEC 60529 Complementary detection face5 positions turret head front materialPlastic operating zone0.00…0.47 in (0…12 mm) differential travel3...20% of Sr repeat accuracy<= 3% of Sr status LEDSupply on 1 LED green)Output state 1 LED yellow) supply voltage limits10…58 V DC switching frequency<= 1000 Hz maximum voltage drop<2 V closed) current consumption0...10 mA no-load maximum delay first up5 ms maximum delay response0.3 ms maximum delay recovery0.7 ms markingCE height1.57 in (40 mm) length1.57 in (40 mm) width4.61 in (117 mm) net weight0.49 lb(US) (0.22 kg) Environment product certificationsC-TickULCCCCSA ambient air temperature for operation-13…158 °F (-25…70 °C) Ordering and shipping details Category22486-SENSORS, PROXIMITY Discount ScheduleDS2 GTIN00785901992561 Package weight(Lbs)0.55 lb(US) (0.250 kg) ReturnabilityNo Country of originID Contractual warranty Warranty18 months
DocumentsCADSizeAdd to My DocumentsCAD for XS7C40PC440: inductive sensor XS7 40x40x117 - plastic - Sn15mm - 12..48VDC - terminals (Version 1.0)
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Dimensions DrawingsDimensions(1)Output LED(2)Supply LED(3)1 tapped entry for Pg 13.5 cable gland(4)2 elongated holes Ø 5.3 x 7
Mounting and ClearanceSetting-upMinimum Mounting Distances (mm)
Side by Sidee (1) ≥40
Face to Facee (2) ≥120
Facing a Metal Objecte (3) ≥45
Connections and SchemaWiring Schemes4-Wire DC