Pressure sensors XMLR 400bar - G 1/4 - 24VDC - 4..20 mA - 2xPNP - M12Show more characteristics >
Product availabilityNon-Stock - Not normally stocked in distribution facility
Main range of productOsiSense XM product or component typeElectronic pressure sensors pressure sensor typePressure transmitter pressure switch type of operationPressure transmitter with 2 switching outputs device short nameXMLR pressure sensor size5801.51 psi (400 bar)5800 psi maximum permissible accidental pressure17404.53 psi (1200 bar)17400 psi120 MPa destruction pressure240 MPa34800 psi34809.06 psi (2400 bar) controlled fluidFresh water (32...176 °F (0...80 °C))Air (-20...80 °C)Hydraulic oil (-20...80 °C)Refrigeration fluid (-20...80 °C) fluid connection typeG 1/4 (female) conforming to DIN 3852-Y [Us] rated supply voltage24 V DC SELV, voltage limits: 17...33 V Complementary current consumption<= 50 mA electrical connection5 pins M12 male connector analogue output function4...20 mA type of output signalAnalogue + discrete analogue output function4...20 mA discrete output typeSolid state PNP, 2 NO/NC programmable maximum switching current250 mA contacts type and composition2 NO/NC programmable scale typeFixed differential voltage drop<= 2 V adjustable range of switching point on rising pressure3.2...40 MPa464...5800 psi464.12...5801.51 psi (32...400 bar) adjustable range of switching point on falling pressure290...5626 psi2...38.8 MPa290.08...5627.46 psi (20...388 bar) minimum differential travel174.05 psi (12 bar)174 psi1.2 MPa materials in contact with fluid316L stainless steel front materialPolyester housing material316L stainless steelPolyacrylamide operating positionAny position, but disposals can falsified the measurement in case of upside down mounting protection typeReverse polarityOvervoltage protectionOverload protectionShort-circuit protection response time on output<= 10 ms analog output<= 5 ms discrete output switching output time delay0...50 s in steps of 1 second display type4 digits 7 segments local signalling2 LEDs yellow light ON when switch is actuated display response time typeFast 50 msNormal 200 msSlow 600 ms delay first up<= 300 ms overall accuracy<= 1 % of the measuring range linearity error on analogue output<= 0.5 % of the measuring range hysteresis on analogue output<= 0.2 % of the measuring range measurement accuracy on switching output<= 0.6 % of the measuring range repeat accuracy<= 0.2 % of the measuring range drift of the sensitivity+/- 0.03 % of measuring range/°C drift of the zero point+/- 0.1 % of measuring range/°C display accuracy<= 1 % of the measuring range mechanical durability>= 10000000 cycles depth1.65 in (42 mm) height3.46 in (88 mm) width1.61 in (41 mm) product weight0.41 lb(US) (0.186 kg) [Uimp] rated impulse withstand voltage0.5 kV DC electromagnetic compatibilityElectrostatic discharge immunity test - test level 8 kV air, 4 kV contact conforming to EN/IEC 61000-4-2Susceptibility to electromagnetic fields - test level 10 V/m (80...2000 MHz) conforming to EN/IEC 61000-4-3Electrical fast transient/burst immunity test - test level 2 kV conforming to EN/IEC 61000-4-4Surge immunity test - test level 1 kV conforming to EN/IEC 61000-4-5Immunity to conducted RF disturbances - test level 10 V (0.15...80 MHz) conforming to EN/IEC 61000-4-6 Environment markingCE product certificationscULusEAC standardsUL 61010-1EN/IEC 61326-2-3 ambient air temperature for operation-4...176 °F (-20...80 °C) ambient air temperature for storage-40...176 °F (-40...80 °C) IP degree of protectionIP65 conforming to EN/IEC 60529IP67 conforming to EN/IEC 60529 vibration resistance20 gn (f = 10...2000 Hz) conforming to EN/IEC 60068-2-6 shock resistance50 gn conforming to EN/IEC 60068-2-27 Ordering and shipping details Category21551 - XMLE,XMLF,XMLG PRESSURE SENSORS Discount ScheduleDS2 GTIN003389119611886 Nbr. of units in pkg.1 Package weight(Lbs)0.41000000000000003 ReturnabilityN Country of originCH Offer Sustainability RoHS (date code: YYWW)Compliant - since 1351 - Schneider Electric declaration of conformity
Schneider Electric declaration of conformity
REACh California proposition 65WARNING: This product can expose you to chemicals including: - - - - - - - Substance 1Diisononyl phthalate (DINP), which is known to the State of California to cause cancer, and - - - - - - - Substance 2Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. - - - - - - - More informationFor more information go to www.p65warnings.ca.gov
Documents and DownloadsLanguage
CatalogSizeAdd to My DocumentsCADSizeAdd to My DocumentsCAD file (on TraceParts) for XMLR400M2P25: Pressure sensors XMLR 400bar - G 1/4 - 24VDC - 4..20 mA - 2xPNP - M12 (Version 2.0)CertificateSizeAdd to My DocumentsXMLP... and XMLR... electronic pressure sensors - cUL certification record (for Canada) (Version 1.0)XMLP... and XMLR... electronic pressure sensors - cUL certification record (for Canada) (Version 1.0)XMLP... and XMLR... electronic pressure sensors - cUL certification record (for Canada) (Version 1.0)XMLP... and XMLR... electronic pressure sensors - UL certification record (Version 1.0)XMLP... and XMLR... electronic pressure sensors - UL certification record (Version 1.0)Instruction SheetSizeAdd to My Documents
No results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Dimensions DrawingsDimensions(1)Fluid entry: G 1/4 A female
Connections and SchemaConnections and SchemaConnector Wiring
Performance CurvesAnalogue Output Description
Analogue Output SignalX :PressureY :Analogue output signal(1)An offset of +/-5% of nominal pressure can be compensated (with Cof Configuration menu. Cof: Offset Compensation)(2)The analogue curve can be adjusted from -25% to +25% of nominal pressure (with AEP Configuration menu. AEP: analogue end point).Switching Output Description. Hysteresis Mode
The hysteresis switching mode is typically used for the “pumping and/or emptying applications”.X :TimeY :Pressure(1)OutputNP :Nominal PressureSP :Set point (adjustable from 8 % to 100 % NP)rP :Reset point (adjustable from 5 % to 97 % NP)Switching Output Description. Window Mode
The window switching mode is typically used for the “pressure regulation applications”X :TimeY :Pressure(1)OutputNP :Nominal pressureFH :High switching point (adjustable from 8 % to 100 % NP)FL :Low switching point (adjustable from 5 % to 97 % NP)Switching Output Description. Time Delay
The Time Delay is typically used to filter out the fast pressure transients.
The output only switches after a time “dS” and “dr” adjustable from 0 to 50 seconds.X :TimeY :Pressure(1)OutputSP :Set pointrP :Reset pointdS :Time delay on the set pointdr :Time delay on the reset point