Pressure sensors XMLR 100bar - 1/4" 18 NPT - 24VDC - 4..20 mA - PNP - M12Show more characteristics >
Product availabilityStock - Normally stocked in distribution facility
Main range of productOsiSense XM product or component typeElectronic pressure sensors pressure sensor typePressure transmitter pressure switch type of operationPressure transmitter with 1 switching output device short nameXMLR pressure sensor size1450.38 psi (100 bar)1450 psi maximum permissible accidental pressure4351.13 psi (300 bar)4350 psi30 MPa destruction pressure8702.26 psi (600 bar)8700 psi60 MPa controlled fluidFresh water (32...176 °F (0...80 °C))Air (-20...80 °C)Hydraulic oil (-20...80 °C)Refrigeration fluid (-20...80 °C) fluid connection type1/4" - 18 NPT (female) [Us] rated supply voltage24 V DC SELV, voltage limits: 17...33 V Complementary current consumption<= 50 mA electrical connection4 pins M12 male connector analogue output function4...20 mA type of output signalAnalogue + discrete analogue output function4...20 mA discrete output typeSolid state PNP, NO/NC programmable maximum switching current250 mA contacts type and compositionNO/NC programmable scale typeFixed differential voltage drop<= 2 V adjustable range of switching point on rising pressure116.03...1450.38 psi (8...100 bar)116...1450 psi0.8...10 MPa adjustable range of switching point on falling pressure72.52...1406.87 psi (5...97 bar)72.5...1407 psi0.5...9.7 MPa minimum differential travel43.51 psi (3 bar)43.5 psi0.3 MPa materials in contact with fluid316L stainless steel front materialPolyester housing materialPolyacrylamide316L stainless steel operating positionAny position, but disposals can falsified the measurement in case of upside down mounting protection typeOverload protectionOvervoltage protectionReverse polarityShort-circuit protection response time on output<= 10 ms analog output<= 5 ms discrete output time delay range0...50 s in steps of 1 second display type4 digits 7 segments local signalling1 LED yellow light ON when switch is actuated display response time typeFast 50 msNormal 200 msSlow 600 ms delay first up<= 300 ms accuracy<= 1 % of the measuring range linearity error<= 0.5 % of the measuring range hysteresis<= 0.2 % of the measuring range measurement accuracy<= 0.6 % of the measuring range repeat accuracy<= 0.2 % of the measuring range drift of the sensitivity+/- 0.03 % of measuring range/°C drift of the zero point+/- 0.1 % of measuring range/°C display accuracy<= 1 % of the measuring range mechanical durability>= 10000000 cycles depth1.65 in (42 mm) height3.46 in (88 mm) width1.61 in (41 mm) product weight0.41 lb(US) (0.186 kg) [Uimp] rated impulse withstand voltage0.5 kV DC electromagnetic compatibilityElectrostatic discharge immunity test - test level 8 kV air, 4 kV contact conforming to EN/IEC 61000-4-2Susceptibility to electromagnetic fields - test level 10 V/m (80...2000 MHz) conforming to EN/IEC 61000-4-3Electrical fast transient/burst immunity test - test level 2 kV conforming to EN/IEC 61000-4-4Surge immunity test - test level 1 kV conforming to EN/IEC 61000-4-5Immunity to conducted RF disturbances - test level 10 V (0.15...80 MHz) conforming to EN/IEC 61000-4-6 Environment markingCE product certificationscULusEAC standardsUL 61010-1EN/IEC 61326-2-3 ambient air temperature for operation-4...176 °F (-20...80 °C) ambient air temperature for storage-40...176 °F (-40...80 °C) IP degree of protectionIP65 conforming to EN/IEC 60529IP67 conforming to EN/IEC 60529 vibration resistance20 gn (f = 10...2000 Hz) conforming to EN/IEC 60068-2-6 shock resistance50 gn conforming to EN/IEC 60068-2-27 Ordering and shipping details Category21551 - XMLE,XMLF,XMLG PRESSURE SENSORS Discount ScheduleDS2 GTIN00785901786658 Nbr. of units in pkg.1 Package weight(Lbs)0.40000000000000002 ReturnabilityY Country of originCH Offer Sustainability RoHS (date code: YYWW) REACh California proposition 65WARNING: This product can expose you to chemicals including: - - - - - - - Substance 1Diisononyl phthalate (DINP), which is known to the State of California to cause cancer, and - - - - - - - Substance 2Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. - - - - - - - More informationFor more information go to www.p65warnings.ca.gov
Documents and DownloadsLanguage
No results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Dimensions DrawingsDimensions(1)Fluid entry: 1/4”-18NPT female
Connections and SchemaConnections and SchemaConnector Wiring(1)I Out or V Out
Performance CurvesAnalogue Output Description
Analogue Output SignalX :PressureY :Analogue output signal(1)An offset of +/-5% of nominal pressure can be compensated (with Cof Configuration menu. Cof: Offset Compensation)(2)The analogue curve can be adjusted from -25% to +25% of nominal pressure (with AEP Configuration menu. AEP: analogue end point).Switching Output Description. Hysteresis Mode
The hysteresis switching mode is typically used for the “pumping and/or emptying applications”.X :TimeY :Pressure(1)OutputNP :Nominal PressureSP :Set point (adjustable from 8 % to 100 % NP)rP :Reset point (adjustable from 5 % to 97 % NP)Switching Output Description. Window Mode
The window switching mode is typically used for the “pressure regulation applications”X :TimeY :Pressure(1)OutputNP :Nominal pressureFH :High switching point (adjustable from 8 % to 100 % NP)FL :Low switching point (adjustable from 5 % to 97 % NP)Switching Output Description. Time Delay
The Time Delay is typically used to filter out the fast pressure transients.
The output only switches after a time “dS” and “dr” adjustable from 0 to 50 seconds.X :TimeY :Pressure(1)OutputSP :Set pointrP :Reset pointdS :Time delay on the set pointdr :Time delay on the reset point