limit switch XCR - metal stay put T rods lever square rod 6 mm - 2X(1NC+NO)Show more characteristics >
Product availabilityNon-Stock - Not normally stocked in distribution facility
Main range of productOsiSense XC series nameSpecial format product or component typeLimit switch product specific applicationFor hoisting and mechanical handling applications device short nameXCR sensor design- body typeFixed head typeRotary head materialMetal fixing modeBy the body movement of operating headRotary type of operatorMetal stay put crossed rods lever (square rod 6 mm) type of approach2 directions lateral approach electrical connectionScrew-clamp terminals, clamping capacity: 1 x 0.5...2 x 2.5 mm² number of poles4 contacts type and composition2 x (1 NC + 1 NO) contact operationSlow-break, break before make contact block per direction [control circuit]1 per direction positive openingWith Complementary body materialZinc alloy switch actuationBy any moving part cable entry1 entry tapped for Pg 13.5 cable gland, cable outer diameter: 0.35...0.47 in (9...12 mm) conforming to NF C 68-300 contacts insulation formZb number of steps1 positive opening minimum torque6.19 lbf.in (0.7 N.m) minimum torque for tripping5.31 lbf.in (0.6 N.m) minimum actuation speed6 m/min maximum actuation speed4.92 ft/s (1.5 m/s) maximum displacement angle90 °-90 ° contact code designationA300, AC-15 240 V, Ie = 3 A) conforming to EN/IEC 60947-5-1 appendix AQ300, DC-13 250 V, Ie = 0.27 A) conforming to EN/IEC 60947-5-1 appendix A [Ui] rated insulation voltage300 V conforming to CSA C22.2 No 14500 V degree of pollution 3 conforming to IEC 60947-1500 V degree of pollution 3 conforming to VDE 0110300 V conforming to UL 508 resistance across terminals<= 25 MOhm conforming to IEC 60255-7 category 3 [Uimp] rated impulse withstand voltage6 kV conforming to IEC 606646 kV conforming to IEC 60947-1 short-circuit protection10 A by gG cartridge fuse electrical durability5000000 cycles, DC-13 inductive load type, 120 V, 4 W, load factor: 0.5, operating rate: <= 60 cyc/mn IEC 60947-5-1 appendix C5000000 cycles, DC-13 inductive load type, 24 V, 7 W, load factor: 0.5, operating rate: <= 60 cyc/mn IEC 60947-5-1 appendix C5000000 cycles, DC-13 inductive load type, 48 V, 10 W, load factor: 0.5, operating rate: <= 60 cyc/mn IEC 60947-5-1 appendix C mechanical durability10000000 cycles width3.35 in (85 mm) height3.74 in (95 mm) depth2.95 in (75 mm) product weight2.5 lb(US) (1.135 kg) terminals description ISO n°1(21-22)NC(13-14)NO Environment shock resistance68 gn conforming to IEC 60068-2-27 vibration resistance9 gn (f = 10...500 Hz) conforming to IEC 60068-2-6 IP degree of protectionIP54 conforming to IEC 60529 overvoltage categoryClass I conforming to NF C 20-030Class I conforming to IEC 61140 ambient air temperature for operation-13...158 °F (-25...70 °C) ambient air temperature for storage-40...158 °F (-40...70 °C) protective treatmentTC product certificationsCCCCSA standardsNF C 79-130EN 60204-1IEC 60947-5-1EN 60947-5-1CSA C22.2 No 14IEC 60204-1 Ordering and shipping details Category22449 - LIMIT SWITCHES,ACCESSORIES Discount ScheduleT GTIN00785901274766 Nbr. of units in pkg.1 Package weight(Lbs)0.35999999999999999 ReturnabilityN Country of originFR Offer Sustainability Sustainable offer statusGreen Premium product RoHS (date code: YYWW) REACh Product end of life instructionsNeed no specific recycling operations California proposition 65WARNING: This product can expose you to chemicals including: - - - - - - - Substance 1Diisononyl phthalate (DINP), which is known to the State of California to cause cancer, and - - - - - - - Substance 2Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. - - - - - - - More informationFor more information go to www.p65warnings.ca.gov Contractual warranty Warranty period18 months
Documents and DownloadsLanguage
CatalogSizeAdd to My DocumentsCADSizeAdd to My Documentsfor hoisting and mechanical handling\complete switches with 1 cable entry\metal rods, square 6 mm crossed or T (Version 1.1)for hoisting and mechanical handling\complete switches with 1 cable entry\metal rods, square 6 mm crossed or T (Version 1.1)CAD files for XCRF57: Limit switches OsiSense XC, Application - hoisting, materials handling, for hoisting applications with ""X"" lever type XCKMR and XCR , with rotary head, in maintened positions, metal square rod levers- 6 mm ""crossed"" or ""T" (Version 1.0)CertificateSizeAdd to My DocumentsXCKJ..., ZCKJ..., XCLJ..., XCR... limit switches and XCSL... safety switches - CSA certificate of compliance (Version 1.0)Instruction SheetSizeAdd to My Documents
No results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Dimensions DrawingsDimensions(1)1 tapped entry for n° 13 cable gland.(2)Rod length: 200 mm.(3)Rod length: 300 mm.
Connections and SchemaWiring DiagramTwo 2-pole NC + NO Break Before Make, Slow Break(A)1st contact(B)2nd contact
Technical DescriptionFunctionnal Diagram(P)Positive opening point(A)1st contact(B)2nd contact(1)NC contact with positive opening operation(2)Closed(3)Open(4)Tripping(5)Resetting