limit switch XCMD - metal end plunger with nitrile boot - 1NC+1NO - slow - 1 mShow more characteristics >
Product availabilityNon-Stock - Not normally stocked in distribution facility
XCMD2511L1 is replaced by the following group of products:
Add Product Group to My Products Remove Product Group from My Products
- Reason for Substitution: end of life
- Substitution date: 01 January 2017
Main range of productOsiSense XC series nameStandard format product or component typeLimit switch device short nameXCMD sensor designMiniature body typeFixed head typePlunger head materialMetal body materialZamak head materialZamak fixing modeBy the body movement of operating headLinear type of operatorSpring return plunger metal (with elastomer boot) type of approachVertical approach 1 direction number of poles2 contacts type and composition1 NC + 1 NO contact operationSlow-break Complementary switch actuationOn end electrical connectionRemovable cable connector cable length3.28 ft (1 m) cable composition5 x 0.75 mm² wire insulation materialPvR contacts insulation formZb positive openingWith positive opening minimum force42.5 N minimum force for tripping8.5 N minimum actuation speed6 m/min maximum actuation speed1.64 ft/s (0.5 m/s) contact code designationB300, AC-15 (Ue = 240 V, Ie = 1.5 A) conforming to EN/IEC 60947-5-1 appendix AR300, DC-13 (Ue = 250 V, Ie = 0.1 A) conforming to EN/IEC 60947-5-1 appendix A [Ui] rated insulation voltage300 V degree of pollution 3 conforming to CSA C22.2 No 14300 V degree of pollution 3 conforming to UL 508400 V degree of pollution 3 conforming to IEC 60947-5-1 resistance across terminals<= 25 MOhm conforming to IEC 60255-7 category 3 [Uimp] rated impulse withstand voltage4 kV conforming to IEC 606644 kV conforming to IEC 60947-1 short-circuit protection6 A by gG cartridge fuse electrical durability5000000 cycles, DC-13, 120 V, 1 W, operating rate: <= 60 cyc/mn, load factor: 0.5 conforming to IEC 60947-5-1 appendix C5000000 cycles, DC-13, 24 V, 3 W, operating rate: <= 60 cyc/mn, load factor: 0.5 conforming to IEC 60947-5-1 appendix C5000000 cycles, DC-13, 48 V, 2 W, operating rate: <= 60 cyc/mn, load factor: 0.5 conforming to IEC 60947-5-1 appendix C mechanical durability10000000 cycles width1.18 in (30 mm) height1.97 in (50 mm) depth0.63 in (16 mm) product weight0.4 lb(US) (0.18 kg) Environment shock resistance25 gn (duration = 18 ms) conforming to IEC 60068-2-27 vibration resistance25 gn (f = 10...500 Hz) conforming to IEC 60068-2-6 IP degree of protectionIP68 conforming to IEC 60529IP66 conforming to IEC 60529IP67 conforming to IEC 60529 IK degree of protectionIK06 conforming to EN 62262 overvoltage categoryClass I conforming to NF C 20-030Class I conforming to IEC 61140 ambient air temperature for operation-13...158 °F (-25...70 °C) ambient air temperature for storage-40...158 °F (-40...70 °C) protective treatmentTC product certificationsULCSACCC standardsCSA C22.2 No 14UL 508EN/IEC 60947-5-1EN/IEC 60204-1 Ordering and shipping details Category22413 - LIMIT SWITCH, IEC, MINIATURE Discount ScheduleT GTIN003389110221176 Nbr. of units in pkg.1 Package weight(Lbs)0.70000000000000007 ReturnabilityN Country of originID Offer Sustainability Sustainable offer statusGreen Premium product RoHS (date code: YYWW) REACh Product environmental profileAvailable Product end of life instructionsNeed no specific recycling operations California proposition 65WARNING: This product can expose you to chemicals including: - - - - - - - Substance 1Diisononyl phthalate (DINP), which is known to the State of California to cause cancer, and - - - - - - - Substance 2Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. - - - - - - - More informationFor more information go to www.p65warnings.ca.gov Contractual warranty Warranty period18 months
Documents and DownloadsLanguage
CADSizeAdd to My DocumentsMetal XCM D, pre-cabled, metal end plunger with elastomer boot (Version 1.1)CAD for XCMD2511L1: limit switch XCMD - metal end plunger with nitrile boot - 1NC+1NO - slow - 1 m (Version 1.0)CAD file (on TraceParts) for XCMD2511L1: limit switch XCMD - metal end plunger with nitrile boot - 1NC+1NO - slow - 1 m (Version 2.0)CertificateSizeAdd to My DocumentsXCMD..., ZCMD..., XCMN... limit switches and XCSM... safety switches - Certificate for China compulsory product certification (Version 1.0)XCMD..., ZCMD..., XCMN... limit switches and XCSM... safety switches - CSA certificate of compliance (Version 1.0)
No results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Dimensions DrawingsDimensions(1)2 fixing holes Ø 4.2 mm, counterbored Ø 8 mm by 4 mm deep.(2)External diameter of cable 7.5 mm.
Mounting and ClearanceMountingSweep of Connecting Cable(1)Recommended(2)To be avoidedSetting-upPlunger or Multi-directional Heads
Connections and SchemaWiring Diagram2-pole N/C + N/O Break before Make, Slow Break(BK)Black(BK-WH)Black White(BU)Blue(BN)Brown(GN-YE)Green Yellow
Technical DescriptionCharacteristics of ActuationSwitch Actuation on EndFunctionnal Diagram(P)Positive opening point(1)NC contact with positive opening operation(2)Closed(3)Open(BK)Black(BK-WH)Black White(BU)Blue(BN)Brown