XCKJ562H29 is replaced by the following group of products:
Add Product Group to My Products Remove Product Group from My Products
- Reason for Substitution: end of life
- Substitution date: 01 January 2017
Main range of productOsiSense XC series nameStandard format product or component typeLimit switch device short nameXCKJ sensor design- body typeFixed head typePlunger head materialMetal body materialZamak head materialZamak fixing modeBy the body movement of operating headLinear type of operatorSpring return roller plunger metal type of approachLateral approach 2 directions cable entry1 entry tapped for M20 x 1.5 cable gland, cable outer diameter: 0.28...0.51 in (7...13 mm) number of poles2 contacts type and composition1 NC + 1 NO contact operationSlow-break, break before make Complementary switch actuationBy 30° cam electrical connectionScrew-clamp terminals, clamping capacity: 1 x 0.5...2 x 2.5 mm² contacts insulation formZb number of steps1 positive openingWith positive opening minimum torque4.42 lbf.in (0.5 N.m) minimum actuation speed6 m/min maximum actuation speed3.28 ft/s (1 m/s) [Ie] rated operational current3 A at 240 V, AC-15, A300 conforming to EN/IEC 60947-5-1 appendix A0.27 A at 250 V, DC-13, Q300 conforming to EN/IEC 60947-5-1 appendix A [Ithe] conventional enclosed thermal current10 A [Ui] rated insulation voltage300 V conforming to CSA C22.2 No 14500 V degree of pollution 3 conforming to IEC 60947-1300 V conforming to UL 508 resistance across terminals<= 25 MOhm conforming to IEC 60255-7 category 3 [Uimp] rated impulse withstand voltage6 kV conforming to IEC 606646 kV conforming to IEC 60947-1 short-circuit protection10 A by gG cartridge fuse electrical durability5000000 cycles, DC-13, inductive load type, 24 V, 10 W, operating rate: <= 60 cyc/mn, load factor: 0.5 conforming to IEC 60947-5-1 appendix C5000000 cycles, DC-13, inductive load type, 48 V, 7 W, operating rate: <= 60 cyc/mn, load factor: 0.5 conforming to IEC 60947-5-1 appendix C5000000 cycles, DC-13, inductive load type, 120 V, 4 W, operating rate: <= 60 cyc/mn, load factor: 0.5 conforming to IEC 60947-5-1 appendix C width1.57 in (40 mm) height3.03 in (77 mm) depth1.73 in (44 mm) terminals description ISO n°1(13-14)NO(21-22)NC Environment shock resistance50 gn (duration = 11 ms) conforming to IEC 60068-2-27 vibration resistance25 gn (f = 10...500 Hz) conforming to IEC 60068-2-6 IP degree of protectionIP66 conforming to IEC 60529 IK degree of protectionIK07 conforming to EN 50102 overvoltage categoryClass I conforming to NF C 20-030Class I conforming to IEC 61140 ambient air temperature for operation-13...158 °F (-25...70 °C) ambient air temperature for storage-40...158 °F (-40...70 °C) protective treatmentTC product certificationsCCCCSAUL standardsCENELEC EN 50041EN 60204-1EN 60947-5-1IEC 60204-1IEC 60947-5-1UL 508CSA C22.2 No 14 Ordering and shipping details Category22411 - LIMIT SWITCHES,IEC,XCKJ Discount ScheduleT Nbr. of units in pkg.1 Package weight(Lbs)0 ReturnabilityN Offer Sustainability Sustainable offer statusGreen Premium product RoHS (date code: YYWW) REACh Product end of life instructionsNeed no specific recycling operations California proposition 65WARNING: This product can expose you to chemicals including: - - - - - - - Substance 1Diisononyl phthalate (DINP), which is known to the State of California to cause cancer, and - - - - - - - Substance 2Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. - - - - - - - More informationFor more information go to www.p65warnings.ca.gov Contractual warranty Warranty period18 months
Documents and DownloadsLanguage
CertificateSizeAdd to My DocumentsXCKJ... and ZCKJ/JD... limit switches (made in France) - Certificate for China compulsory product certification (Version 1.0)XCKJ..., ZCKJ..., XCLJ..., XCR... limit switches and XCSL... safety switches - CSA certificate of compliance (Version 1.0)
No results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Dimensions DrawingsDimensions(1)Tapped entry for M20 x 1.5Ø :2 elongated holes Ø 5.3 x 7.3.
Mounting and ClearanceMounting with Cable EntryPosition of Cable Gland(1)Recommended(2)To be avoided
Connections and SchemaWiring Diagram2-pole NC + NO Break before Make, Slow Break
Technical DescriptionCharacteristics of ActuationSwitch Actuation by 30° CamFunctionnal Diagram(P)Positive opening point(A)Cam displacement(1)NC contact with positive opening operation(2)Closed(3)Open