limit switch XCKD - with rotary head w/o operating lever - 1NC+1NO - snap - M12Show more characteristics >
Product availabilityNon-Stock - Not normally stocked in distribution facility
XCKD2101M12 is replaced by the following group of products:
Add Product Group to My Products Remove from My Products
- Reason for Substitution: end of life
- Substitution date: 01 January 2017
Main range of productOsiSense XC series nameStandard format product or component typeLimit switch device short nameXCKD sensor designCompact body typeFixed head typeRotary head materialMetal body materialZamak head materialZamak fixing modeBy the body movement of operating headRotary type of operatorSpring return without operating lever type of approachLateral approach 2 directions number of poles2 contacts type and composition1 NC + 1 NO contact operationSnap action Complementary electrical connectionMale connector M12 5 pins contacts insulation formZb positive openingWith positive opening minimum torque2.21 lbf.in (0.25 N.m) minimum torque for tripping0.88 lbf.in (0.1 N.m) maximum actuation speed4.92 ft/s (1.5 m/s) [Ie] rated operational current3 A at 50 V, AC-15 conforming to EN/IEC 60947-5-1 appendix A0.27 A at 50 V, DC-13 conforming to EN/IEC 60947-5-1 appendix A [Ithe] conventional enclosed thermal current4 A [Ui] rated insulation voltage60 V degree of pollution 3 conforming to IEC 60947-1 resistance across terminals<= 25 MOhm conforming to IEC 60255-7 category 3 [Uimp] rated impulse withstand voltage0.8 kV conforming to IEC 606640.8 kV conforming to IEC 60947-1 short-circuit protection4 A by gG cartridge fuse electrical durability5000000 cycles, DC-13, 24 V, 10 W, operating rate: <= 60 cyc/mn, load factor: 0.5 conforming to IEC 60947-5-1 appendix C5000000 cycles, DC-13, 48 V, 7 W, operating rate: <= 60 cyc/mn, load factor: 0.5 conforming to IEC 60947-5-1 appendix C mechanical durability10000000 cycles width1.22 in (31 mm) height2.56 in (65 mm) depth1.18 in (30 mm) product weight0.43 lb(US) (0.195 kg) terminals description ISO n°1(21-22)NC(13-14)NO Environment shock resistance50 gn (duration = 11 ms) conforming to IEC 60068-2-27 vibration resistance25 gn (f = 10...500 Hz) conforming to IEC 60068-2-6 IK degree of protectionIK06 conforming to EN 50102 electrical shock protection classClass I conforming to IEC 61140Class I conforming to NF C 20-030 ambient air temperature for operation-13...158 °F (-25...70 °C) ambient air temperature for storage-40...158 °F (-40...70 °C) protective treatmentTC product certificationsULCCCCSA standardsEN 60947-5-1EN 60204-1IEC 60204-1IEC 60947-5-1CSA C22.2 No 14UL 508 Ordering and shipping details Category22418 - LIMIT SWITCH,IEC,XCKP&XCKT Discount ScheduleT GTIN00785901449188 Nbr. of units in pkg.1 Package weight(Lbs)0.70000000000000007 ReturnabilityY Country of originFR Offer Sustainability Sustainable offer statusGreen Premium product RoHS (date code: YYWW) REACh Product end of life instructionsNeed no specific recycling operations California proposition 65WARNING: This product can expose you to chemicals including: - - - - - - - Substance 1Diisononyl phthalate (DINP) which is known to the State of California to cause cancer and - - - - - - - Substance 2Di-isodecyl phthalate (DIDP) which is known to the State of California to cause birth defects or other reproductive harm. - - - - - - - More informationFor more information go to www.p65warnings.ca.gov Contractual warranty Warranty period18 months
Documents and DownloadsLanguage
CADSizeAdd to My DocumentsPlastic or metal XCK P or XCK D, integral M12 connector, head type ZCE01Plastic or metal XCK P or XCK D, integral M12 connector, head type ZCE01
No results found.
Dimensions DrawingsDimensions(1)Tapped entry for M12(2)2 elongated holes Ø 4.3 x 6.3 mm on 22 mm centres, 2 holes Ø 4.3 on 20 mm centres.(3)2 x Ø 3 holes for support studs, depth 4 mm.
Mounting and ClearanceMounting with Cable EntryPosition of Cable Gland(1)Recommended(2)To be avoidedMounting with Rotary Heads and LeversType of Cam(1)Recommended(2)To be avoidedSetting-up with Head ZCE01 and ZCE09(1)Tightening torque (Min : 1) (Max : 1.5)(2)Tightening torque (Min : 0.8) (Max : 1.2)
Connections and SchemaWiring Diagram2-pole NC + NO Snap ActionConnectionsM12 Connector1-2 :NC3-4 :NO5 :Grounding
Technical DescriptionCharacteristics of ActuationSwitch Actuation on EndFunctionnal Diagram(1)Closed(2)Open(4)Tripping(5)Resetting