red projecting reset pushbutton Ø22 marked O for 17...120 mm actuation distanceShow more characteristics >
Product availabilityNon-Stock - Not normally stocked in distribution facility
Main range of productHarmony XB5 product or component typeComplete manual overload reset push-button device short nameXB5 bezel materialPlastic fixing collar materialPlastic head typeStandard mounting diameter0.87 in (22 mm) shape of signaling unit headRound operator profileRed projecting, white O activating distance0.67...4.72 in (17...120 mm) Complementary height1.14 in (29 mm) width1.14 in (29 mm) depth4.72 in (120 mm) product weight0.06 lb(US) (0.027 kg) resistance to high pressure washer1015.26 psi (7000000 Pa) at 131 °F (55 °C),distance: 0.1 m operating travel0.39 in (10 mm) customizableNo Environment protective treatmentTH ambient air temperature for storage-40...158 °F (-40...70 °C) ambient air temperature for operation-40...158 °F (-40...70 °C) electrical shock protection classClass II conforming to IEC 60536 IP degree of protectionIP66 conforming to IEC 60529 NEMA degree of protectionNEMA 4X IK degree of protectionIK03 conforming to IEC 50102 standardsEN/IEC 60947-1 product certificationsUL listed Ordering and shipping details Category22467 - PUSHBUTTONS,22MM(PLASTIC) NEW Discount ScheduleCS2 GTIN00785901383772 Nbr. of units in pkg.1 Package weight(Lbs)5.9999999999999998E-2 ReturnabilityN Country of originFR Offer Sustainability California proposition 65WARNING: This product can expose you to chemicals including: - - - - - - - Substance 1Nickel compounds, which is known to the State of California to cause cancer, and - - - - - - - Substance 2Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. - - - - - - - More informationFor more information go to www.p65warnings.ca.gov Contractual warranty Warranty period18 months
Documents and DownloadsLanguage
CatalogSizeAdd to My DocumentsHarmony XB5 Plastic, pushbuttons, switches and pilot lights (Version 11.0)Digest 178 Catalog 19: Push Buttons and Operator Interface (Version 1.0)CertificateSizeAdd to My Documents
No results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Dimensions DrawingsDimensionse:clamping thickness: 1 to 6 mm / 0.04 to 0.24 in.(1)Actuation distance: see table below
Actuation distance in mm
Actuation distance in in.
41 to 150
1.61 to 5.91
150 to 260
5.91 to 10.24
Mounting and ClearancePanel Cut-out for Pushbuttons, Switches and Pilot Lights (Finished Holes, Ready for Installation)Connection by Screw Clamp Terminals or Plug-in Connectors or on Printed Circuit Board(1)Diameter on finished panel or support(2)For selector switches and Emergency stop buttons, use of an anti-rotation plate type ZB5AZ902 is recommended.(3)Ø22.5 mm recommended (Ø22.3 0+0.4) / Ø0.89 in. recommended (Ø0.88 in. 0+0.016)
a in mm
a in in.
b in mm
b in in.
By screw clamp terminals or plug-in connector
By Faston connectors
On printed circuit board
1.18Detail of Lug Recess(1)Diameter on finished panel or support(2)For selector switches and Emergency stop buttons, use of an anti-rotation plate type ZB5AZ902 is recommended.(3)Ø22.5 mm recommended (Ø22.3 0+0.4) / Ø0.89 in. recommended (Ø0.88 in. 0+0.016)