white flush/red projecting/black flush triple-headed pushbutton Ø22 1NO+1NC+1NOShow more characteristics >
Product availabilityNon-Stock - Not normally stocked in distribution facility
Main range of productHarmony XB4 product or component typeComplete triple-headed push-button device short nameXB4 bezel materialChromium plated metal fixing collar materialZamak head typeStandard mounting diameter0.87 in (22 mm) shape of signaling unit headRectangular type of operatorSpring return operator profile2 flush - 1 central projecting STOP push-buttons operators descriptionWhite ''right arrow'' - black ''left arrow'' - red ''STOP'' contacts type and composition1 NO + 1 NC contact operationSlow-break connections - terminalsScrew clamp terminals: <= 2 x 1.5 mm² with cable end conforming to EN/IEC 60947-1Screw clamp terminals: >= 1 x 0.22 mm² without cable end conforming to EN/IEC 60947-1Spring terminals: <= 2 x 1.5 mm² with cable end conforming to EN/IEC 60947-1Spring terminals: >= 1 x 0.22 mm² without cable end conforming to EN/IEC 60947-1 Complementary product weight0.28 lb(US) (0.128 kg) resistance to high pressure washer1015.26 psi (7000000 Pa) at 131 °F (55 °C),distance: 0.1 m colour of markingBlack marking when white capsWhite marking when green, red or black caps operator profileBlack flush, white left arrowRed projecting, white STOPWhite flush, black right arrow contacts usageStandard contacts positive openingWith positive opening conforming to EN/IEC 60947-5-1 appendix K operating travel0.06 in (1.5 mm) (NC changing electrical state)0.1 in (2.6 mm) (NO changing electrical state)0.17 in (4.3 mm) (total travel) operating force3.5 N (NC changing electrical state)3.8 N (NO changing electrical state) mechanical durability1000000 cycles tightening torque7.08...10.62 lbf.in (0.8...1.2 N.m) conforming to EN 60947-1 shape of screw headCross head compatible with JIS No 1 screwdriverCross head compatible with Philips no 1 screwdriverCross head compatible with pozidriv No 1 screwdriverSlotted head compatible with flat Ø 4 mm screwdriverSlotted head compatible with flat Ø 5.5 mm screwdriver contacts materialSilver alloy (Ag/Ni) short-circuit protection10 A cartridge fuse type gG conforming to EN/IEC 60947-5-1 [Ith] conventional free air thermal current10 A conforming to EN/IEC 60947-5-1 [Ui] rated insulation voltage600 V (degree of pollution: 3) conforming to EN 60947-1 [Uimp] rated impulse withstand voltage6 kV conforming to EN 60947-1 [Ie] rated operational current3 A at 240 V, AC-15, A600 conforming to EN/IEC 60947-5-16 A at 120 V, AC-15, A600 conforming to EN/IEC 60947-5-10.1 A at 600 V, DC-13, Q600 conforming to EN/IEC 60947-5-10.27 A at 250 V, DC-13, Q600 conforming to EN/IEC 60947-5-10.55 A at 125 V, DC-13, Q600 conforming to EN/IEC 60947-5-11.2 A at 600 V, AC-15, A600 conforming to EN/IEC 60947-5-1 electrical durability1000000 cycles, AC-15, 2 A at 230 V, operating rate: 3600 cyc/h, load factor: 0.5 conforming to EN/IEC 60947-5-1 appendix C1000000 cycles, AC-15, 3 A at 120 V, operating rate: 3600 cyc/h, load factor: 0.5 conforming to EN/IEC 60947-5-1 appendix C1000000 cycles, AC-15, 4 A at 24 V, operating rate: 3600 cyc/h, load factor: 0.5 conforming to EN/IEC 60947-5-1 appendix C1000000 cycles, DC-13, 0.2 A at 110 V, operating rate: 3600 cyc/h, load factor: 0.5 conforming to EN/IEC 60947-5-1 appendix C1000000 cycles, DC-13, 0.5 A at 24 V, operating rate: 3600 cyc/h, load factor: 0.5 conforming to EN/IEC 60947-5-1 appendix C electrical reliabilityΛ < 10exp(-6) at 5 V, 1 mA in clean environment conforming to EN/IEC 60947-5-4Λ < 10exp(-8) at 17 V, 5 mA in clean environment conforming to EN/IEC 60947-5-4 Environment protective treatmentTH ambient air temperature for storage-40...158 °F (-40...70 °C) ambient air temperature for operation-13...158 °F (-25...70 °C) electrical shock protection classClass I conforming to IEC 61140 IP degree of protectionIP69 conforming to IEC 60529IP69K conforming to IEC 60529 NEMA degree of protectionNEMA 13NEMA 4X IK degree of protectionIK06 conforming to IEC 50102 standardsUL 508CSA C22.2 No 14EN/IEC 60947-5-1EN/IEC 60947-1EN/IEC 60947-5-4EN/IEC 60947-5-5JIS C 4520 product certificationsGLRINAUL listedDNVBVLROS (Lloyds register of shipping)CSA vibration resistance5 gn (f = 2...500 Hz) conforming to IEC 60068-2-6 shock resistance30 gn (duration = 18 ms) half sine wave acceleration conforming to IEC 60068-2-2750 gn (duration = 11 ms) half sine wave acceleration conforming to IEC 60068-2-27 Ordering and shipping details Category22468 - PUSHBUTTONS,22MM(METAL) NEW Discount ScheduleCS2 Nbr. of units in pkg.1 Package weight(Lbs)0.28000000000000003 ReturnabilityN Country of originFR Offer Sustainability California proposition 65WARNING: This product can expose you to chemicals including: - - - - - - - Substance 1Nickel compounds, which is known to the State of California to cause cancer, and - - - - - - - Substance 2Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. - - - - - - - More informationFor more information go to www.p65warnings.ca.gov Contractual warranty Warranty period18 months
Documents and DownloadsLanguage
CADSizeAdd to My Documents
No results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Dimensions DrawingsDimensionse :clamping thickness: 1 to 6 mm / 0.04 to 0.24 in.
Mounting and ClearancePanel Cut-out for Pushbuttons, Switches and Pilot Lights (Finished Holes, Ready for Installation)
Connection by Screw Clamp Terminals or Plug-in Connectors or on Printed Circuit Board
Connection by Faston Connectors(1)Diameter on finished panel or support(2)40 mm min. / 1.57 in. min.(3)30 mm min. / 1.18 in. min.(4)Ø 22.5 mm / 0.89 in. recommended (Ø 22.3 mm 0+0.4 / 0.88 in. 0+0.016)(5)45 mm min. / 1.78 in. min.(6)32 mm min. / 1.26 in. min.Pushbuttons, Switches and Pilot Lights for Printed Circuit Board ConnectionPanel Cut-outs (Viewed from Installer’s Side)A:30 mm min. / 1.18 in. min.B:40 mm min. / 1.57 in. min.Printed Circuit Board Cut-outs (Viewed from Electrical Block Side)
Dimensions in mmA:30 mm min.B:40 mm min.
Dimensions in in.A:1.18 in. min.B:1.57 in. min.General Tolerances of the Panel and Printed Circuit Board
The cumulative tolerance must not exceed 0.3 mm / 0.012 in: T1 + T2 = 0.3 mm max.Installation Precautions
Minimum thickness of circuit board: 1.6 mm / 0.06 in.
Cut-out diameter: 22.4 mm ± 0.1 / 0.88 in. ± 0.004
Orientation of body/fixing collar ZB4 BZ009: ± 2°30’ (excluding cut-outs marked a and b).
Tightening torque of screws ZBZ 006: 0.6 N.m (5.3 lbf.in) max.
Allow for one ZB4 BZ079 fixing collar/pillar and its fixing screws:
every 90 mm / 3.54 in. horizontally (X), and 120 mm / 4.72 in. vertically (Y).
with each selector switch head (ZB4 BD•, ZB4 BJ•, ZB4 BG•).
The fixing centers marked a and b are diagonally opposed and must align with those marked 4 and 5.(1)Panel(2)Printed circuit boardMounting of Adapter (Socket) ZBZ 01•
1 2 elongated holes for ZBZ 006 screw access
2 1 hole Ø 2.4 mm ± 0.05 / 0.09 in. ± 0.002 for centring adapter ZBZ 01•
3 8 × Ø 1.2 mm / 0.05 in. holes
4 1 hole Ø 2.9 mm ± 0.05 / 0.11 in. ± 0.002, for aligning the printed circuit board (with cut-out marked a)
5 1 elongated hole for aligning the printed circuit board (with cut-out marked b)
6 4 holes Ø 2.4 mm / 0.09 in. for clipping in adapter ZBZ 01•
Dimensions An + 18.1 relate to the Ø 2.4 mm ± 0.05 / 0.09 in. ± 0.002 holes for centring adapter ZBZ 01•.