View all Harmony XAC Medium-Duty Pendant Stations
pendant control station XAC-B - 2 pushbuttons 1 Emergency stopShow more characteristics >
XACB3201 has not been replaced. Please contact your customer care center for more information.
* Price is “List Price” and may be subject to a trade discount – check with your local distributor or retailer for actual price.
Add to My Products Remove from My Products
The maximum number of products that can be compared is 4
Main range of productHarmony XAC product or component typePendant control station device short nameXACB Complementary control station typeDouble insulated enclosure materialGlass reinforced polyester electrical circuit typePower circuit enclosure typeComplete ready for use control station applicationControl of single speed hoist motor control station composition2 push-buttons + 1 emergency stop control button typeStop push-button Ø 40 mm 3 NC latchingFirst push-button 3-pole raise, slowSecond push-button 3-pole lower, slow product compatibilityXESD2201 for reversing operationXACS499 for emergency stop mechanical interlockingWith mechanical interlocking control station colourYellow connections - terminalsScrew clamp terminals, 1 x 2.5 mm² with or without cable endScrew clamp terminals, 2 x 1.5 mm² with or without cable end standardsEN/IEC 60204-32CSA C22.2 No 14EN/IEC 60947-5-1 product certificationsCSA type 4 protective treatmentTH ambient air temperature for operation-13…158 °F (-25…70 °C) ambient air temperature for storage-40…158 °F (-40…70 °C) vibration resistance15 gn 10…500 Hz)IEC 60068-2-6 shock resistance100 gn IEC 60068-2-27 overvoltage categoryClass II IEC 61140 IP degree of protectionIP65 IEC 60529 mechanical durability1000000 cycles cable entryRubber sleeve with stepped entry 0.39…0.87 in (10…22 mm) [Ithe] conventional enclosed thermal current20 A [Ui] rated insulation voltageEmergency stop contact 400 V 3)IEC 60947-1 300 VCSA [Uimp] rated impulse withstand voltage6 kV IEC 60947-1 contact operationSnap action operating force32 N push-button40 N emergency stop short-circuit protection12 A fuse protection cartridge aM rated power in hp3 hp 240 V rated operational power in W3000 W 240 V3000 W 400 V electrical durability1000000 cycles AC-3, 3000 W 400 V 10 cyc/mn 0.4 IEC 60947-3 appendix A1000000 cycles AC-4, 3000 W 400 V 10 cyc/mn 0.4 IEC 60947-3 appendix A700000 cycles AC-3, 3000 W 240 V 10 cyc/mn 0.4 IEC 60947-3 appendix A700000 cycles AC-4, 3000 W 240 V 10 cyc/mn 0.4 IEC 60947-3 appendix A terminals description ISO n°1(13-14)NO(33-34)NO(53-54)NO(73-74)NO(63-64)NO(23-24)NO terminals description ISO n°2(31-32)NC(21-22)NC(11-12)NC terminal identifier(13-14)NO(11-12)NC net weight2.20 lb(US) (1 kg) Ordering and shipping details Category18407-WORLD SERVICE PARTS(SENSORS) Discount ScheduleT GTIN03389110470758 Package weight(Lbs)2.16 lb(US) (0.980 kg) ReturnabilityNo Country of originCZ Offer Sustainability California proposition 65WARNING: This product can expose you to chemicals including: Nickel compounds, which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov REACh Regulation REACh free of SVHCYes EU RoHS DirectivePro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration
Toxic heavy metal freeYes Mercury freeYes RoHS exemption information China RoHS Regulation WEEEThe product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins. Contractual warranty Warranty18 months
Documents and DownloadsLanguage
CertificateSizeAdd to My Documents
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.