pendant control station XAC-B - 2 pushbuttonsShow more characteristics >
Product availabilityNon-Stock - Not normally stocked in distribution facility
Main range of productHarmony XAC product or component typePendant control station device short nameXACB Complementary control station typeDouble insulated enclosure materialGlass reinforced polyester electrical circuit typePower circuit enclosure typeComplete ready for use control station applicationControl of single speed hoist motor control station composition2 push-buttons control button typeFirst push-button 2-pole raise, slowSecond push-button 2-pole lower, slow product compatibilityXESD1191 for reversing operation mechanical interlockingWith mechanical interlocking control station colourYellow connections - terminalsScrew clamp terminals 1 x 2.5 mm² with or without cable endScrew clamp terminals 2 x 1.5 mm² with or without cable end standardsEN/IEC 60204-32EN/IEC 60947-5-1CSA C22.2 No 14 product certificationsCSA type 4 protective treatmentTH ambient air temperature for operation-13...158 °F (-25...70 °C) ambient air temperature for storage-40...158 °F (-40...70 °C) vibration resistance15 gn 10...500 Hz IEC 60068-2-6 shock resistance100 gn IEC 60068-2-27 overvoltage categoryClass II IEC 61140 IP degree of protectionIP65 IEC 60529 mechanical durability1000000 cycles cable entryRubber sleeve with stepped entry 10...22 mm [Ithe] conventional enclosed thermal current12 A [Ui] rated insulation voltage600 V CSA500 V 3 IEC 60947-1 [Uimp] rated impulse withstand voltage6 kV IEC 60947-1 contact operationSnap action operating force17 N push-button short-circuit protection<= 10 A fuse protection cartridge aM rated power in hp2 hp CSA 240 V3 hp CSA 600 V5 hp CSA 400 V rated operational power in W2200 W AC-3 240 V IEC 60947-3 appendix A2200 W AC-3 400 V IEC 60947-3 appendix A2200 W AC-4 240 V IEC 60947-3 appendix A2200 W AC-4 400 V IEC 60947-3 appendix A electrical durability300000 cycles AC-3 2200 W 240 V 10 cyc/mn 0.4 IEC 60947-3 appendix A300000 cycles AC-3 2200 W 400 V 10 cyc/mn 0.4 IEC 60947-3 appendix A300000 cycles AC-4 2200 W 240 V 10 cyc/mn 0.4 IEC 60947-3 appendix A300000 cycles AC-4 2200 W 400 V 10 cyc/mn 0.4 IEC 60947-3 appendix A500000 cycles AC-3 1500 W 240 V 10 cyc/mn 0.4 IEC 60947-3 appendix A500000 cycles AC-4 1500 W 240 V 10 cyc/mn 0.4 IEC 60947-3 appendix A800000 cycles AC-3 1500 W 400 V 10 cyc/mn 0.4 IEC 60947-3 appendix A800000 cycles AC-4 1500 W 400 V 10 cyc/mn 0.4 IEC 60947-3 appendix A terminals description ISO n°1(13-14)NO(23-24)NO(33-34)NO(43-44)NO terminal identifier(11-12)NC(13-14)NO product weight0.78 lb(US) (0.355 kg) Ordering and shipping details Category22473 - PUSHBUTTON, PENDANTS Discount ScheduleCS2 Nbr. of units in pkg.1 Package weight(Lbs)1.78 ReturnabilityN Country of originCZ Offer Sustainability California proposition 65WARNING: This product can expose you to chemicals including: - - - - - - - Substance 1Nickel compounds, which is known to the State of California to cause cancer, and - - - - - - - Substance 2Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. - - - - - - - More informationFor more information go to www.p65warnings.ca.gov Contractual warranty Warranty period18 months
Documents and DownloadsLanguage
No results found.
Protective cable sleeves(1)Internal ø
Connections and SchemaControl of Single-Speed Reversing Motor 2-Phase Switching
With XESD1191 contact block, to be ordered separately
Combined with 3-pole isolating block XACS399 or XACS3991, shown in the unoperated position (pendant station “supplied”), fitted with key release trigger action latching Emergency stop operator.