Schneider Electric USA Website

Welcome to our website.

To view product availability in a specific country, select from the country list below. For Investor Relations, please visit our global site.

Choose another country or region

ATV IMC drive controller card type G generic

Show more characteristics >
  • Product availability
    Non-Stock - Not normally stocked in distribution facility
  • Price
    655.00 USD
Add to My Products Remove from My Products
The maximum number of products that can be compared is 4

  • Main
    range of product
    Altivar IMC
    product or component type
    Drive controller card
    module configuration
    Configured and programmed with SoMachine software
    product specific application
    discrete I/O number
    analogue I/O number
    discrete input number
    6 discrete input(s) input
    4 discrete input(s) fast input
    discrete input type
    Configurable as single phase counter (LI51, LI59)
    Configurable for incremental encoder (LI51, LI52)
    Configurable for incremental encoder (LI59, LI60)
    discrete input logic
    Positive logic (sink) fast input
    Sink or source (positive/negative) input
    discrete input voltage
    24...30 V
    discrete input voltage type
    number of common point
    1 common point(s) analogue output
    1 common point(s) analogue input
    3 common point(s) logic input
    voltage state 1 guaranteed
    >= 11 Vfor logic input
    voltage state 0 guaranteed
    <= 5 Vfor logic input
    input impedance
    500 Ohmfor analogue output
    4.4 kOhm logic input
    network frequency
    <= 100 kHz fast input (counter mode)
    <= 100 kHz fast input (encoder mode)
    discrete output number
    6 discrete output(s) transistor output
    discrete output logic
    Positive logic (source)
    discrete output voltage
    24...30 V DCfor transistor output
    discrete output current
    2 Afor transistor output (LO51...LO56)
    output compatibility
    Level 1 PLC transistor output
    absolute accuracy error
    +/- 1 % for a temperature variation 60 °C (analogue input)
    +/- 1 % for a temperature variation 60 °C (analogue output)
    short-circuit protection
    With short-circuit protection output and fast output
    overvoltage protection
    With overvoltage protection output and fast output
    overload protection
    With overload protection output and fast output
    analogue input number
    analogue input type
    Configurable voltage or current
    analogue input range
    0...5 V
    0...20 mA
    analogue input resolution
    10 bits
    analogue output number
    analogue output range
    0...20 mA
    analogue output resolution
    12 bits
    linearity error
    +/- 0.4 % of maximum value analogue input
    +/- 0.2 % of maximum value analogue output
    [Us] rated supply voltage
    24 V DC
    supply voltage limits
    19...30 V
    memory description
    Internal RAM: 2000 kB
    Flash: 2000 kB
    Internal data storage (FRAM): 64 ko
    Program memory: 1 Mo
    integrated connection type
    MDI/MDX port: RJ45 Ethernet - 10BASE-T/100BASE-TX
    Programmation port: mini B USB - 480 Mbit/s
    CANopen: male SUB-D 9 CANopen - master access
    CANopen feature profile
    DS 301 V4.02
    DR 303-1
    level or class
    Class M20 - <= 32 slave(s) CANopen
    communication service
    320 TPDOs and RPDOs maxi
    10 PDOs per slave (transmission/emission)
    transmission rate
    1000 kbit/s with 65.62 ft (20 m) cable CANopen
    500 kbit/s with 328.08 ft (100 m) cable CANopen
    250 kbit/s with 820.21 ft (250 m) cable CANopen
    125 kbit/s with 1640.42 ft (500 m) cable CANopen
    50 kbit/s with 3280.84 ft (1000 m) cable CANopen
    20 kbit/s with 8202.1 ft (2500 m) cable CANopen
    local signalling
    1 LED green/yellow ETH (Ethernet activity)
    1 LED green/red CAN (CANopen activity)
    1 LED green/red USER (programmable)
    1 LED green/red NS (Network Status)
    1 LED green/red MS (Module Status)
    electrical connection
    3 connectors with screw terminal block - <= 1 x 1.5 mm² - AWG 16 for inputs/outputs
    1 connector with removable screw terminal block - 3 contacts - <= 1 x 1.5 mm² - AWG 16 for connecting the 24 V DC power supply
    1 connector - mini B USB for programming with SoMachine software
    1 male connector - SUB-D 9 for connection to the CANopen bus
    1 connector - RJ45 for programming with SoMachine software/Ethernet Modbus TCP network
    tightening torque
    2.21 (0.25 N.m)
    associated complete product
    product weight
    0.41 lb(US) (0.185 kg)
    Ordering and shipping details
    22135 - ATV61-71 ACCESSORIES
    Discount Schedule
    Nbr. of units in pkg.
    Package weight(Lbs)
    Country of origin
    Offer Sustainability
    RoHS (date code: YYWW)
    Compliant  - since  1149  -  Schneider Electric declaration of conformity
    Schneider Electric declaration of conformity
    California proposition 65
    WARNING: This product can expose you to chemicals including:
    - - - - - - - Substance 1
    Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm.
    - - - - - - - Substance 2
    Bisphenol A (BPA), which is known to the State of California to cause birth defects or other reproductive harm.
    - - - - - - - More information
    For more information go to
    Contractual warranty
    Warranty period
    18 months
  • Documents and Downloads

    • English
    Add to My Documents
    Digest 178 Catalog 26: AC Drives and Soft Starters (Version 1.0)
    EU RoHS Declaration
    Add to My Documents
    Date 7/11/19
    Size 195.3 KB
  • Technical FAQs

    No results found.
    Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
  • Connections and Schema

    Terminals of the Card

    Analog Outputs
    Analog Inputs
    Digital Inputs
    Digital Outputs
    CANopen SubD9
    Mini USB
    Ethernet RJ45
    24 Vdc terminal block

    Logic Inputs LI51…LI60
    Shielded Twisted Pair

    Shield connected to the ground

    I/O Wiring Diagrams
    Current Mode, Power Consumption < 200 mA

    Voltage Mode, Power Consumption < 200 mA

    Current Mode, Card Powered by External Power Supply

    2 A fast blow fuse for power supply