power plug-in relay - Zelio RPM - 3 C/O - 110 V DC - 15 A - with LEDShow more characteristics >
Product availabilityNon-Stock - Not normally stocked in distribution facility
Main range of productZelio Relay series namePower product or component typePlug-in relay device short nameRPM contacts type and composition3 C/O [Uc] control circuit voltage110 V DC [Ithe] conventional enclosed thermal current15 A at -40...131 °F (-40...55 °C) status LEDWith control typeLockable test button utilisation coefficient20 % Complementary shape of pinFlat [Ui] rated insulation voltage250 V conforming to IEC300 V conforming to UL300 V conforming to CSA [Uimp] rated impulse withstand voltage4 kV 1.2/50 µs contacts materialAgNi [Ie] rated operational current15 A at 277 V AC conforming to UL7.5 A at 28 V DC (NC) conforming to IEC15 A at 250 V AC (NO) conforming to IEC7.5 A at 250 V AC (NC) conforming to IEC15 A at 28 V DC (NO) conforming to IEC15 A at 28 V DC conforming to UL maximum switching voltage250 V conforming to IEC Resistive load current15 A at 250 V AC15 A at 28 V DC maximum switching capacity3750 VA420 W minimum switching capacity170 mW at 10 mA, 17 V operating rate<= 18000 cycles/hour no-load<= 1200 cycles/hour under load mechanical durability10000000 cycles electrical durability100000 cycles resistive load Average coil consumption1.5 W drop-out voltage threshold>= 0.1 Uc DC Operate time20 ms at nominal voltage Release time20 ms at nominal voltage rated operational voltage limits88...121 V DC protection categoryRT I operating positionAny position safety reliability dataB10d = 100000 product weight0.12 lb(US) (0.054 kg) device presentationComplete product Environment dielectric strength2000 V AC between coil and contact with reinforced insulation2000 V AC between poles with basic insulation1500 V AC between contacts with micro disconnection insulation standardsEN/IEC 61810-1UL 508CSA C22.2 No 14 product certificationsCSARoHSULREACHEAC ambient air temperature for storage-40...185 °F (-40...85 °C) ambient air temperature for operation-40...131 °F (-40...55 °C) vibration resistance3 gn (f = 10...150 Hz), amplitude +/- 1 mm (on 5 cycles in operation)5 gn (f = 10...150 Hz), amplitude +/- 1 mm (on 5 cycles not operating) Degree of protection (Housing only)IP40 conforming to EN/IEC 60529 shock resistance30 gn not operating15 gn in operation pollution degree3 Ordering and shipping details Category21127 - ZELIO ICE CUBE RELAYS Discount ScheduleCP2 GTIN00785901797203 Nbr. of units in pkg.10 Package weight(Lbs)0.12 ReturnabilityN Country of originCN Offer Sustainability California proposition 65WARNING: This product can expose you to chemicals including: - - - - - - - Substance 1Nickel compounds, which is known to the State of California to cause cancer, and - - - - - - - Substance 2Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. - - - - - - - More informationFor more information go to www.p65warnings.ca.gov Contractual warranty Warranty period18 months
Documents and DownloadsLanguage
CatalogSizeAdd to My DocumentsDigest 178 Catalog 23: Relays and Timers (Version 1.0)CADSizeAdd to My DocumentsCertificateSizeAdd to My DocumentsUL Recognized RPF, RSL1, RPM, RSB, RUMC, RUMF, RXM (Version 1.0)
No results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Pin Side View
Connections and SchemaWiring Diagram
Symbols shown in blue correspond to Nema marking.
Performance CurvesElectrical Durability of Contacts
Durability (inductive load) = durability (resistive load) x reduction coefficient.
Resistive AC loadXSwitching capacity (kVA)YDurability (Number of operating cycles)
Reduction coefficient for inductive AC load (depending on power factor cos ϕ)YReduction coefficient (A)
Maximum switching capacity on resistive DC loadXVoltage DCYCurrent DC
Note : These are typical curves, actual durability depends on load, environment, duty cycle, etc.