power relay plug-in - Zelio RPF - 2 NO - 12 V DC - 30 AShow more characteristics >
Product availabilityStock - Normally stocked in distribution facility
Main range of productZelio Relay series namePower product or component typePlug-in relay device short nameRPF contacts type and composition2 NO [Uc] control circuit voltage12 V DC control typeWithout lockable test button shape of pinFlat contacts materialSilver tin oxide [Ithe] conventional enclosed thermal current25 A at -40...131 °F (-40...55 °C) relays side by side without a gap30 A at -40...131 °F (-40...55 °C) 13 mm gap between two relays Resistive rated load25 A at 28 V DC30 A at 250 V AC utilisation coefficient10 % Complementary mounting supportPanelDIN rail control circuit voltage limits9.6...13.2 V [Ie] rated operational current30 A at 250 V AC (for NO) conforming to IEC30 A at 277 V AC (for NO) conforming to UL20 A at 28 V DC (for NO) conforming to UL25 A at 28 V DC (for NO) conforming to IEC [Ui] rated insulation voltage250 V conforming to IEC300 V conforming to UL [Uimp] rated impulse withstand voltage4 kV 1.2/50 µs maximum switching voltage250 V conforming to IEC maximum switching capacity7500 VA/700 W Minimum recommended switching capacity6000 mW (500 mA/ 12 V) NO operating rate<= 18000 cycles/hour no-load<= 1200 cycles/hour under load mechanical durability5000000 cycles electrical durability100000 cycles resistive load Average coil consumption1.7 W drop-out voltage threshold>= 0.1 Uc Operate time25 ms Release time25 ms average resistance86 Ohm (tolerance +/- 10 %) at 68 °F (20 °C) safety reliability dataB10d = 100000 protection categoryRT II operating positionAny position product weight0.18 lb(US) (0.082 kg) device presentationComplete product Environment dielectric strength2000 V AC between poles with basic insulation1500 V AC between contacts with micro disconnection insulation4000 V AC between coil and contact with reinforced insulation standardsCSA C22.2 No 14EN/IEC 61810-1UL 508 product certificationsULCECSAGOST ambient air temperature for storage-40...185 °F (-40...85 °C) ambient air temperature for operation-40...131 °F (-40...55 °C) vibration resistance3 gn (+/- 1 mm, f = 10...150 Hz) 5 cycles in operation10 gn (+/- 1 mm, f = 10...150 Hz) 5 cycles not operating IP degree of protectionIP40 conforming to EN/IEC 60529 shock resistance10 gn in operation30 gn not operating pollution degree3 Ordering and shipping details Category21127 - ZELIO ICE CUBE RELAYS Discount ScheduleCP2 GTIN00785901899433 Nbr. of units in pkg.10 Package weight(Lbs)0.17999999999999999 ReturnabilityY Country of originCN Offer Sustainability Sustainable offer statusGreen Premium product RoHS (date code: YYWW) REACh Product environmental profileAvailable Product end of life instructionsNeed no specific recycling operations California proposition 65WARNING: This product can expose you to chemicals including: - - - - - - - Substance 1Nickel compounds, which is known to the State of California to cause cancer, and - - - - - - - Substance 2Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. - - - - - - - More informationFor more information go to www.p65warnings.ca.gov Contractual warranty Warranty period18 months
Documents and DownloadsLanguage
CatalogSizeAdd to My DocumentsDigest 178 Catalog 23: Relays and Timers (Version 1.0)CADSizeAdd to My DocumentsCertificateSizeAdd to My DocumentsUL Recognized RPF, RSL1, RPM, RSB, RUMC, RUMF, RXM (Version 1.0)
No results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Connections and SchemaWiring Diagram
Symbols shown in blue correspond to Nema marking.
Performance CurvesElectrical Durability of ContactsAC Resistive loadXSwitching capacity (kVA)YDurability (number of operating cycles)AC Reduction coefficient for inductive load (depending on power factor cos ϕ)
Durability (inductive load) = durability (resistive load) x reduction coefficient.Yreduction coefficientMaximum switching capacity on DC resistive loadA30 AB25 A
Note : These are typical curves, actual durability depends on load, environment, duty cycle, etc.