time delay relay 9 functions - 1 s..100 h - 24..240 V AC - 1 OCShow more characteristics >
Product availabilityStock - Normally stocked in distribution facility
Main range of productZelio Time product or component typeModular timing relay discrete output typeRelay width0.69 in (17.5 mm) device short nameRE17R time delay typeAdAhNOPPtTlTtW time delay range0.1...1 s1...10 h1...10 min1...10 s10...100 h6...60 min6...60 s nominal output current8 A Complementary contacts type and composition1 C/O contacts materialCadmium free control typeSelector switch on front panel [Us] rated supply voltage24...240 V AC at 50/60 Hz24 V DC voltage range0.85...1.1 Us supply frequency50...60 Hz (+/- 5 %) release of input voltage10 V connections - terminalsScrew terminals, clamping capacity: 1 x 0.5...1 x 3.3 mm² AWG 20...AWG 12 (solid) without cable endScrew terminals, clamping capacity: 2 x 0.5...2 x 2.5 mm² AWG 20...AWG 14 (solid) without cable endScrew terminals, clamping capacity: 1 x 0.2...1 x 2.5 mm² AWG 24...AWG 14 (flexible) with cable endScrew terminals, clamping capacity: 2 x 0.2...2 x 1.5 mm² AWG 24...AWG 16 (flexible) with cable end tightening torque5.31...8.85 lbf.in (0.6...1 N.m) conforming to IEC 60947-1 housing materialSelf-extinguishing repeat accuracy+/- 0.5 % conforming to IEC 61812-1 temperature drift+/- 0.05 %/°C voltage drift+/- 0.2 %/V setting accuracy of time delay+/- 10 % of full scale at 25 °C conforming to IEC 61812-1 control signal pulse width100 ms with load in parallel typical30 ms typical insulation resistance100 MOhm at 500 V DC conforming to IEC 60664-1 reset time120 ms on de-energisation typical on-load factor100 % power consumption in VA0...32 VA at 240 V AC power consumption in W<= 0.6 W at 24 V DC minimum switching current10 mA at 5 V DC maximum switching current8 A AC/DC maximum switching voltage250 V AC breaking capacity<= 2000 VA operating frequency10 Hz electrical durability100000 cycles resistive load (8 A at 250 V AC maximum) mechanical durability10000000 cycles dielectric strength2.5 kV 1 mA/1 minute 50 Hz conforming to IEC 61812-1 [Uimp] rated impulse withstand voltage5 kV (1.2/50 µs) power on delay< 100 ms markingCE creepage distance4 kV/3 conforming to IEC 60664-1 safety reliability dataMTTFd = 296.8 yearsB10d = 270000 mounting positionAny position in relation to normal vertical mounting plane mounting support35 mm DIN rail conforming to EN/IEC 60715 local signallingLED indicator on steady: relay energised, no timing in progressLED indicator flashing: timing in progress (80 % ON and 20 % OFF)LED indicator pulsing: relay de-energised, no timing in progress (except function Di-D, Li-L) (5 % ON and 95 % OFF) product weight0.15 lb(US) (0.07 kg) Environment immunity to microbreaks<= 20 ms standards2004/108/ECEN 61000-6-1EN 61000-6-2EN 61000-6-3EN 61000-6-4IEC 61812-12006/95/EC product certificationsCSAcULusGL ambient air temperature for storage-22...140 °F (-30...60 °C) ambient air temperature for operation-4...140 °F (-20...60 °C) IP degree of protectionIP20 (terminal block) conforming to IEC 60529IP40 (housing) conforming to IEC 60529IP50 (front panel) conforming to IEC 60529 vibration resistance20 m/s² (f = 10...150 Hz) conforming to IEC 60068-2-6 shock resistance15 gn (duration = 11 ms) conforming to IEC 60068-2-27 relative humidity93 % without condensation conforming to IEC 60068-2-30 electromagnetic compatibilityElectrostatic discharge immunity test, in contact at 6 kV conforming to IEC 61000-4-2 level 3Electrostatic discharge immunity test, in air at 8 kV conforming to IEC 61000-4-2 level 3Susceptibility to electromagnetic fields, 80 MHz to 1 GHz at 10 V/m conforming to IEC 61000-4-3 level 3Electrical fast transient/burst immunity test, capacitive connecting clip at 1 kV conforming to IEC 61000-4-4 level 3Electrical fast transient/burst immunity test, direct at 2 kV conforming to IEC 61000-4-4 level 31.2/50 µs shock waves immunity test, differential mode at 1 kV conforming to IEC 61000-4-5 level 31.2/50 µs shock waves immunity test, common mode at 2 kV conforming to IEC 61000-4-5 level 3Conducted RF disturbances, 0.15...80 MHz at 10 V conforming to IEC 61000-4-6 level 3Voltage dips and interruptions immunity test, 1 cycle at 0 % conforming to IEC 61000-4-11Voltage dips and interruptions immunity test, 25/30 cycles at 70 % conforming to IEC 61000-4-11Conducted and radiated emissions conforming to EN 55022 class B Ordering and shipping details Category22370 - RE, RM MISC TIMERS & COUNTERS Discount ScheduleCP2 GTIN00785901525677 Nbr. of units in pkg.1 Package weight(Lbs)0.17000000000000001 ReturnabilityY Country of originID Offer Sustainability Sustainable offer statusGreen Premium product RoHS (date code: YYWW) REACh Product environmental profileAvailable Product end of life instructionsAvailable California proposition 65WARNING: This product can expose you to chemicals including: - - - - - - - Substance 1Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. - - - - - - - More informationFor more information go to www.p65warnings.ca.gov
Documents and DownloadsLanguage
CatalogSizeAdd to My DocumentsDigest Catalog 23: Relays and Timers (Version 1.8)CertificateSizeAdd to My Documents
No results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Dimensions DrawingsWidth 17.5 mm
Connections and SchemaInternal Wiring DiagramWiring Diagram
1) Contact Y1:
Control for functions B, C, Ac, Bw, Ad, Ah, N, O, W, T, Tt.
Partial stop for functions At, Ht and Pt.
Function D if Di selected.
Not used for functions A, H and P.
Technical DescriptionFunction Ad : Pulse Delayed Relay with Control SignalDescription
After power-up, pulsing or maintaining of control contact C starts the timing T.
At the end of this timing period T, the output R closes.
The output R will be reset the next time control contact C is pulsed or maintained.Function: 1 OutputFunction Ah : Pulse Delayed Relay (Single Cycle) with Control SignalDescription
After power-up, pulsing or maintaining of control contact C starts the timing T. A single cycle then starts with 2 timing periods T of equal duration (start with output in rest position).
Output R closes at the end of the first timing period T and reverts to its initial position at the end of the second timing period T.
Control contact C must be reset in order to re-start the single flashing cycle.Function: 1 OutputFunction N : Retriggerable Interval Relay with Control Signal OnDescription
After power-up and an initial control pulse C, the output R closes.
If the interval between two control pulses C is greater than the set timing period T, timing elapses normally and the output R closes at the end of the timing period. If the interval is not greater than the set timing period, the output R remains closed until this condition is met.Function: 1 OutputFunction O : Retriggerable Interval Delayed Relay with Control Signal OnDescription
An initial timing period T begins on energisation. At the end of this timing period, the output R closes.
As soon as there is a control pulse C, the output R reverts to its initial state until the interval between two control pulses is less than the value of the set timing period T. Otherwise, the output R closes at the end of the timing period T.Function: 1 OutputFunction P : Pulse Delayed Relay with Fixed Pulse LengthDescription
The timing period T begins on energisation.
At the end of this period, the output R closes for a fixed time P.Function: 1 Output
P = 500 msFunction Pt : Pulse Delayed Relay (Summation and Fixed Pulse Length) with Control Signal OffDescription
On energisation, timing period T starts (it can be interrupted by operating the Gate control contact G).
At the end of this period, the output R closes for a fixed time P.Function: 1 Output
T = t1 + t2 + ...
P = 500 msFunction TL : Bistable Relay with Control Signal OnDescription
After power-up, pulsing or maintaining of control contact Y1 switches the output on.
A second pulse on the control contact Y1 switches the output relay off.Function Tt : Retriggerable Bistable Relay with Control Signal OnDescription
After power-up, pulsing or maintaining of control contact C switches output R on and starts timing T.
The output switches off at the end of the timing period T or following a second pulse on the control contact C.Function: 1 OutputFunction W : Interval Relay with Control Signal OffDescription
After power-up and opening of the control contact, the output(s) close(s) for a timing period T.
At the end of this timing period the output(s) revert(s) to its/their initial state.
The second output can be either timed or instantaneous.Function: 1 OutputFunction: 2 Outputs
2 timed outputs (R1/R2) or 1 timed output (R1) and 1 instantaneous output (R2 inst.).Legend
Relay or solid state outputR1/R2
2 timed outputsR2 inst.
The second output is instantaneous if the right position is selectedT
Timing periodTa -
Adjustable On-delayTr -