View all Modicon OTB
I/O distributed module OTB - Modbus non isolated serial link - 0..10 mShow more characteristics >
To be discontinued on 29 November 2019
* Price is “List Price” and may be subject to a trade discount – check with your local distributor or retailer for actual price.
Product availabilityStock - Normally stocked in distribution facility
Main range of productModicon OTB product or component typeI/O distributed module integrated connection typeNon isolated serial link 2 x RJ45 in parallel, master/slave Modbus, RTU/ASCII asynchronous in baseband, RS485 2 twisted shielded pairs 1.2...38.4 kbit/s half duplex discrete input number12 EN/IEC 61131 type 1 discrete input logicSink or source discrete input current5 mA I0...I15 mA I6...I77 mA I2...I57 mA I8...I11 discrete output number2 solid state PNP Q0...Q1 source6 relay Q2...Q7 discrete output current2000 mA relay300 mA solid state Complementary topologyDevices linked by daisy-chaining or tap junctions bus length0.00…32.81 ft (0…10 m) 0.00…49.21 ft (0…15 m) number of devices per segment0…32 data format7 or 8 bits, 1 or 2 stop bits parityNoEvenOdd discrete input voltage24 V discrete input voltage typeDC discrete input typeNPN or PNP input voltage limits20.4...26.4 V electronic filtering time0.035 ms I0...I1 at state 10.035 ms I6...I7 at state 10.04 ms I2...I5 at state 10.04 ms I8...I11 at state 10.045 ms I0...I1 at state 00.045 ms I6...I7 at state 00.15 ms I2...I5 at state 00.15 ms I8...I11 at state 0 configurable filtering time3 ms12 ms0 ms input impedance3.4 kOhm I2...I53.4 kOhm I8...I115.7 kOhm I0...I15.7 kOhm I6...I7 discrete output voltage24 V DC solid state240 V AC relay30 V DC relay output voltage limits20.4...28.8 V solid state maximum output current360 mA, solid state maximum current per output common8 A relay0.72 A solid state current consumption30 mA 5 V DC at state 1) relay output40 mA 24 V DC at state 1) relay output5 mA 5 V DC at state 0) relay output output overvoltage protection38...40 V maximum tungsten load<8 W solid state response time300 µs at state 0 relay300 µs at state 1 relay5 µs at state 0 solid state5 µs at state 1 solid state minimum switchable load0.1 mA contact bounce time<= 1 ms relay maximum leakage current0.1 mA at state 0 solid state drop-out voltage1 V at state 1 insulation between channel and internal logic1500 Vrms for 1 minute relay output500 Vrms for 1 minute input circuit500 Vrms for 1 minute solid state output insulation between channelsNone contact resistance30 mOhm electrical durability500000 cycles AC-1 500 VA relay output500000 cycles AC-14 250 VA relay output500000 cycles AC-15 200 VA relay output500000 cycles DC-1 60 W relay output500000 cycles DC-13 30 W relay output supply circuit typeDC [Us] rated supply voltage24 V supply voltage limits20.4…26.2 V input current700 mA 26.2 V supply circuit inrush current1 A solid state output50 A supply circuit power consumption in W19 W maximum number of I/O expansion module7 I/O expansion capacity132 screw terminal discrete I/O188 spring terminal discrete I/O244 HE10 connector discrete I/O7 x 8I or 7 x 2I or 7 x (4I/2O) screw terminal analogue I/O insulation resistance>= 10 MOhm between I/O and earth terminals>= 10 MOhm between power supply and earth I/O connectionRemovable screw terminal block number of common point1 relay output 1 NO)1 relay output 2 NO)1 relay output 3 NO)1 input1 solid state output counting input number2 counting capacity32 bits counting frequency5000 Hz20000 Hz pulse generator number2 pulse generator frequency7 kHz pulse generator functionRPLS pulse generator outputRPWM pulse width modulation markingCE fixing modeBy clips 35 mm symmetrical DIN rail)By screws panel with fixing kit)By screws solid plate with fixing kit) status LEDI/O 1 LED per channel green)PWR 1 LED green)ERR 1 LED red)COM 1 LED yellow) net weight0.42 lb(US) (0.19 kg) Environment IP degree of protectionIP20 immunity to microbreaks10 ms supply circuit dielectric strength500 V between I/O and earth terminals500 V between power supply and earth standardsCSA C22.2 No 213 Class I Division 2 Group AEN 61131-2IEC 61131-2CSACSA C22.2 No 213 Class I Division 2 Group BCSA C22.2 No 213 Class I Division 2 Group DUL 508CSA C22.2 No 213 Class I Division 2 Group C product certificationsCULus ambient air temperature for operation32…131 °F (0…55 °C) ambient air temperature for storage-13…158 °F (-25…70 °C) relative humidity30…95 % without condensation pollution degree2 EN 606642 IEC 60664 operating altitude0...6561.68 ft (0...2000 m) storage altitude0.00…9842.52 ft (0…3000 m) vibration resistance0.075 mm 10…57 Hz 35 mm symmetrical DIN rail1 gn 57…150 Hz 35 mm symmetrical DIN rail shock resistance15 gn 11 ms EN 6113115 gn 11 ms IEC 61131 resistance to electrostatic discharge4 kV in contact IEC 61000-4-28 kV in air EN 61000-4-28 kV in air IEC 61000-4-24 kV in contact EN 61000-4-2 resistance to radiated fields9.14 V/m (10 V/m) 80000000…2000000000 Hz EN 61000-4-39.14 V/m (10 V/m) 80000000…2000000000 Hz IEC 61000-4-3 resistance to fast transients1 kV IEC 61000-4-4 24 V solid state I/O)2 kV IEC 61000-4-4 24 V supply) Ordering and shipping details Category18217 - ADVANTYS OTB Discount SchedulePC12 GTIN00785901621188 Package weight(Lbs)0.32 kg (0.7 lb(US)) ReturnabilityNo Country of originFR Offer Sustainability Sustainable offer statusGreen Premium product California proposition 65WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov REACh Regulation EU RoHS DirectivePro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration
Mercury freeYes RoHS exemption information China RoHS Regulation Environmental Disclosure Circularity Profile WEEEThe product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins. Contractual warranty Warranty18 months
Documents and DownloadsLanguage
CatalogSizeAdd to My Documents
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.