USA
Schneider Electric USA Website

Welcome to our website.

To view product availability in a specific country, select from the country list below. For Investor Relations, please visit our global site.

Choose another country or region

motion servo drive - Lexium 32-single phase supply voltage 115/230V - 0.5/1.kW

Show more characteristics >
  • Product availability
    Non-Stock - Not normally stocked in distribution facility
  • Price*
    1,477.44 USD
Add to My Products Remove from My Products
The maximum number of products that can be compared is 4

  • Main
    range of product
    Lexium 32
    product or component type
    Motion servo drive
    device short name
    LXM32S
    format of the drive
    Book
    Phase
    Single phase
    [Us] rated supply voltage
    100...120 V (- 15...10 %)
    200...240 V (- 15...10 %)
    supply voltage limits
    170...264 V
    85...132 V
    supply frequency
    50/60 Hz (- 5...5 %)
    network frequency
    47.5...63 Hz
    EMC filter
    Integrated
    continuous output current
    6 A (f = 8 kHz)
    output current 3s peak
    10 A at 115 V for 5 s
    maximum continuous power
    500 W at 115 V
    nominal power
    0.5 kW at 115 V (f = 8 kHz)
    line current
    8.5 A, THDI of 147 % at 115 V, without line choke
    9.9 A, THDI of 74 % at 115 V, with external line choke of 2 mH
    10.6 A, THDI of 93 % at 230 V, with external line choke of 2 mH
    Complementary
    switching frequency
    8 kHz
    overvoltage category
    III
    leakage current
    <= 30 mA
    output voltage
    <= power supply voltage
    electrical isolation
    Between power and control
    type of cable
    Single-strand IEC cable (for θ = 122 °F (50 °C)) conductor material: copper 90 °C ,wire insulation material: XLPE/EPR
    electrical connection
    Terminal cable 3 mm² AWG 12 (PA/+, PBI, PBe)
    tightening torque
    4.42 lbf.in (0.5 N.m) (PA/+, PBI, PBe)
    discrete input number
    2 capture
    discrete input type
    Capture (CAP)
    sampling duration
    0.25 ms
    discrete input voltage
    24 V DC capture
    discrete input logic
    Positive (compliment of STO_A, compliment of STO_B) at State 0: < 5 V at State 1: > 15 V conforming to EN/IEC 61131-2 type 1
    response time
    <= 5 ms (compliment of STO_A, compliment of STO_B)
    discrete output number
    3
    discrete output type
    Logic (DO) 24 V DC
    discrete output voltage
    <= 30 V DC
    discrete output logic
    Positive or negative (DO) conforming to EN/IEC 61131-2
    contact bounce time
    <= 1 ms (compliment of STO_A, compliment of STO_B)
    braking current
    50 mA
    response time on output
    250 µs (DO) discrete
    safety function
    STO (safe torque off), integrated
    safety level
    SIL 3 conforming to EN/IEC 61508
    communication interface
    Integrated SERCOS III
    Integrated Modbus
    connector type
    RJ45 (labelled CN7) :Modbus
    commissioning port
    2-wire RS485 multidrop Modbus
    transmission rate
    9600, 19200, 38400 bps for bus length of 40 m Modbus
    number of addresses
    Modbus
    status LED
    1 LED (red) servo drive voltage
    signalling function
    Display of faults in 7 segments
    marking
    CE
    operating position
    Vertical +/- 10 degree
    product compatibility
    Servo motor BMH (2.76 in (70 mm), 1 motor stacks)
    width
    2.68 in (68 mm)
    height
    10.63 in (270 mm)
    depth
    9.33 in (237 mm)
    product weight
    4.19 lb(US) (1.9 kg)
    Environment
    electromagnetic compatibility
    Conducted EMC conforming to EN 55011 class A group 1
    standards
    EN/IEC 61800-3
    product certifications
    CSA
    IP degree of protection
    IP20 conforming to EN/IEC 60529
    vibration resistance
    1 gn (f = 13...150 Hz) conforming to EN/IEC 60068-2-6
    shock resistance
    15 gn 11 ms conforming to EN/IEC 60028-2-27
    pollution degree
    2 conforming to EN/IEC 61800-5-1
    environmental characteristic
    Classes 3C1 conforming to IEC 60721-3-3
    relative humidity
    Class 3K3 (5 to 85 %) without condensation conforming to IEC 60721-3-3
    ambient air temperature for operation
    32...122 °F (0...50 °C) conforming to UL
    ambient air temperature for storage
    -13...158 °F (-25...70 °C)
    type of cooling
    Integrated fan
    operating altitude
    <= 3280.84 ft (1000 m) without derating
    Ordering and shipping details
    Category
    18261 - LEXIUM 32 SERVO DRIVES II
    Discount Schedule
    PC51
    GTIN
    003606480694752
    Nbr. of units in pkg.
    1
    Package weight(Lbs)
    4.2000000000000002
    Returnability
    N
    Country of origin
    ID
    Offer Sustainability
    Sustainable offer status
    Green Premium product
    RoHS (date code: YYWW)
    Compliant  - since  1427  -  Schneider Electric declaration of conformity
    Schneider Electric declaration of conformity
    REACh
    Product environmental profile
    Available
    Product end of life instructions
    Available
    California proposition 65
    WARNING: This product can expose you to chemicals including:
    - - - - - - - Substance 1
    Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm.
    - - - - - - - More information
    For more information go to www.p65warnings.ca.gov
    Contractual warranty
    Warranty period
    18 months
  • Documents and Downloads

    Language
    • English
    EU RoHS Declaration
    Date
    Size
    Add to My Documents
    REACh Declaration
    Date
    Size
    Add to My Documents
    Firmware - Released
    Date
    Size
    Add to My Documents
    LXM32S Firmware (Version 01.04.03)
    Date 4/11/16
    Size 359.7 KB
    LXM32S Firmware Multiloader (Version 01.04.04)
    Date 11/6/18
    Size 369.7 KB
    Lexium 32 Flashtool (Version 2.200)
    Date 10/2/18
    Size 384.9 KB
    Date 10/2/18
    Size 4.2 MB
  • Technical FAQs

    No results found.
    Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
  • Dimensions Drawings

    Lexium 32 Servo Drive
    Dimensions



  • Mounting and Clearance

    Lexium 32 Motion Control Servo Drives
    Mounting Recommendations


    LXM32•U45M2, •U90M2 and LXM32•U60N4 servo drives are cooled by natural convection. LXM32•D18M2, •D30M2, LXM32 •D12N4, •D18N4, •D30N4 and •D72N4servo drives have an integrated fan.

    When installing the servo drive in the enclosure, follow the instructions below with regard to the temperature and protection index:

    • Provide sufficient cooling of the servo drive

    • Do not mount the servo drive near heat sources

    • Do not mount the servo drive on flammable materials

    • Do not heat the servo drive cooling air by currents of hot air from other equipment and components, for example from an external braking resistor

    • Mount the servo drive vertically (± 10%)

    • If the servo drive is used above its thermal limits, control stops due to overtemperature

    NOTE: For cables that are connected via the underside of the servo drive, a free space ≥ 200 mm/7.87 in. is required under the unit to comply with the bending radius of the connection cables.

    Ambient temperature

    Mounting distances

    Instructions to be followed

    0°C…+ 50°C

    d ≥ 0 mm

    + 50°C…+ 60°C

    d ≥ 0 mm

    Reduce the output current by 2.2% per °C above 50°C

    NOTE: Do not use insulated enclosures, as they have a poor level of conductivity.

    Recommendations for Mounting in an Enclosure

    To ensure good air circulation in the servo drive:

    • Fit ventilation grilles on the enclosure.

    • Ensure that ventilation is adequate, otherwise install a forced ventilation unit with a filter.


    (1)
    Natural convection
    (2)
    Forced ventilation

    • Any apertures and/or fans must provide a flow rate at least equal to that of the servo drive fans (refer to characteristics).

    • Use special filters with IP 54 protection.

    Mounting in Metal Enclosure (IP 54 Degree of Protection)

    The servo drive must be mounted in a dust and damp proof enclosure in certain environmental conditions, such as dust, corrosive gases, high humidity with risk of condensation and dripping water, splashing liquid, etc. In these cases, Lexium 32 servo drives can be installed in an enclosure where the internal temperature must not exceed 60°C.


Compare products: /