View all TeSys D Contactors
View all TeSys D Contactors
TeSys D reversing contactor - 3P(3 NO) - AC-3 - <= 440 V 32 A - 24 V DC coilShow more characteristics >
LC2D326BL has not been replaced. Please contact your customer care center for more information.
* Price is “List Price” and may be subject to a trade discount – check with your local distributor or retailer for actual price.
Product availabilityNon-Stock - Not normally stocked in distribution facility
- Price*535.00 USD
Add to My Products Remove from My Products
The maximum number of products that can be compared is 4
Main rangeTeSys product nameTeSys D product or component typeReversing contactor device short nameLC2D contactor applicationResistive loadMotor control utilisation categoryAC-3AC-1 device presentationPreassembled with reversing power busbar poles description3P power pole contact composition3 NO System VoltageAC 25...400 Hz for power circuitDC for power circuit [Ie] rated operational current32 A (<= 140 °F (60 °C)) at <= 440 V AC AC-3 power circuit50 A (<= 140 °F (60 °C)) at <= 440 V AC AC-1 power circuit motor power kW15 kW at 380...400 V AC 50 Hz18.5 kW at 500 V AC 50 Hz18.5 kW at 660...690 V AC 50 Hz15 kW at 415...440 V AC 50 Hz7.5 kW at 220...230 V AC 50 Hz motor power HP (UL / CSA)2 hp at 115 V AC 60 Hz 1 phase motors7.5 hp at 200/208 V AC 60 Hz 3 phases motors5 hp at 230/240 V AC 60 Hz 1 phase motors10 hp at 230/240 V AC 60 Hz 3 phases motors20 hp at 460/480 V AC 60 Hz 3 phases motors30 hp at 575/600 V AC 60 Hz 3 phases motors control circuit typeDC low consumption [Uc] control circuit voltage24 V DC auxiliary contact composition1 NO + 1 NC [Uimp] rated impulse withstand voltage6 kV conforming to IEC 60947 overvoltage categoryIII [Ith] conventional free air thermal current50 A at <= 140 °F (60 °C) power circuit10 A at <= 140 °F (60 °C) signalling circuit Irms rated making capacity550 A at 440 V power circuit conforming to IEC 60947140 A AC signalling circuit conforming to IEC 60947-5-1250 A DC signalling circuit conforming to IEC 60947-5-1 rated breaking capacity550 A at 440 V power circuit conforming to IEC 60947 [Icw] rated short-time withstand current138 A <= 104 °F (40 °C) 1 min power circuit260 A <= 104 °F (40 °C) 10 s power circuit430 A <= 104 °F (40 °C) 1 s power circuit60 A <= 104 °F (40 °C) 10 min power circuit100 A 1 s signalling circuit120 A 500 ms signalling circuit140 A 100 ms signalling circuit associated fuse rating63 A gG at <= 690 V coordination type 1 power circuit63 A gG at <= 690 V coordination type 2 power circuit10 A gG signalling circuit conforming to IEC 60947-5-1 average impedance2 mOhm at 50 Hz - Ith 50 A power circuit [Ui] rated insulation voltage600 V power circuit certifications CSA600 V power circuit certifications UL690 V power circuit conforming to IEC 60947-4-1690 V signalling circuit conforming to IEC 60947-1600 V signalling circuit certifications CSA600 V signalling circuit certifications UL electrical durability1.65 Mcycles 32 A AC-3 at Ue <= 440 V1.4 Mcycles 50 A AC-1 at Ue <= 440 V power dissipation per pole2 W AC-35 W AC-1 safety coverWith interlocking typeMechanical mounting supportPlateRail standardsCSA C22.2 No 14EN 60947-4-1EN 60947-5-1IEC 60947-4-1IEC 60947-5-1UL 508 product certificationsCSABVRINACCCLROS (Lloyds register of shipping)GLDNVULGOST connections - terminalsControl circuit: lugs-ring terminals - external diameter: 0.31 in (8 mm)Power circuit: lugs-ring terminals - external diameter: 0.39 in (10 mm) tightening torqueControl circuit: 15.04 lbf.in (1.7 N.m) - on lugs-ring terminals - with screwdriver flat Ø 6 mm screw : M3.5Control circuit: 15.04 lbf.in (1.7 N.m) - on lugs-ring terminals - with screwdriver Philips No 2 screw : M3.5Power circuit: 22.12 lbf.in (2.5 N.m) - on lugs-ring terminals - with screwdriver flat Ø 8 mm screw : M4Power circuit: 22.12 lbf.in (2.5 N.m) - on lugs-ring terminals - with screwdriver Philips No 2 screw : M4 operating time65.45...88.55 ms closing20...30 ms opening safety reliability levelB10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1 mechanical durability30 Mcycles operating rate<= 3600 cyc/h at <= 140 °F (60 °C) Complementary coil technologyBuilt-in bidirectional peak limiting diode suppressor control circuit voltage limits0.1...0.3 Uc drop-out at 140 °F (60 °C), DC0.8...1.25 Uc operational at 140 °F (60 °C), DC time constant40 ms inrush power in W2.4 W at 68 °F (20 °C) hold-in power consumption in W2.4 W at 68 °F (20 °C) auxiliary contacts typeType mechanically linked (1 NO + 1 NC) conforming to IEC 60947-5-1Type mirror contact (1 NC) conforming to IEC 60947-4-1 signalling circuit frequency25...400 Hz minimum switching current5 mA signalling circuit minimum switching voltage17 V Signalling circuit non-overlap time1.5 ms on de-energisation (between NC and NO contact)1.5 ms on energisation (between NC and NO contact) insulation resistance> 10 MOhm signalling circuit Environment IP degree of protectionIP20 front face conforming to IEC 60529 protective treatmentTH conforming to IEC 60068-2-30 pollution degree3 ambient air temperature for operation-4...140 °F (-20...60 °C) ambient air temperature for storage-76...176 °F (-60...80 °C) permissible ambient air temperature around the device-40...158 °F (-40...70 °C) at Uc operating altitude9842.52 ft (3000 m) without derating fire resistance1562 °F (850 °C) conforming to IEC 60695-2-1 flame retardanceV1 conforming to UL 94 mechanical robustnessVibrations contactor open 2 Gn, 5...300 HzVibrations contactor closed 4 Gn, 5...300 HzShocks contactor closed 15 Gn for 11 msShocks contactor open 8 Gn for 11 ms height3.35 in (85 mm) width3.54 in (90 mm) depth3.98 in (101 mm) product weight2.48 lb(US) (1.127 kg) Ordering and shipping details Category22354 - CTR,TESYS D,OPEN,9-38A AC Discount ScheduleI12 GTIN003389110719413 Nbr. of units in pkg.1 Package weight(Lbs)2.6000000000000001 ReturnabilityN Country of originFR Offer Sustainability RoHS (date code: YYWW)Compliant - since 0719 - Schneider Electric declaration of conformity
Schneider Electric declaration of conformity
REACh Product end of life instructionsNeed no specific recycling operations California proposition 65WARNING: This product can expose you to chemicals including: - - - - - - - Substance 1Antimony oxide & Antimony trioxide, which is known to the State of California to cause cancer. - - - - - - - More informationFor more information go to www.p65warnings.ca.gov Contractual warranty Warranty period18 months
Documents and DownloadsLanguage
CADSizeAdd to My DocumentsCAD file (on TraceParts) for LC2D326BL: TeSys D reversing contactor - 3P(3 NO) - AC-3 - <= 440 V 32 A - 24 V DC coil (Version 2.0)CertificateSizeAdd to My DocumentsInstruction SheetSizeAdd to My Documents
No results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.