TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 9 A - 110 V AC coilShow more characteristics >
Product availabilityNon-Stock - Not normally stocked in distribution facility
Main rangeTeSys product nameTeSys D product or component typeContactor device short nameLC1D contactor applicationMotor controlResistive load utilisation categoryAC-1AC-3AC-4 poles description3P power pole contact composition3 NO System Voltage<= 300 V DC power circuit<= 690 V AC 25...400 Hz power circuit [Ie] rated operational current25 A (<= 140 °F (60 °C)) at <= 440 V AC AC-1 power circuit9 A (<= 140 °F (60 °C)) at <= 440 V AC AC-3 power circuit motor power kW2.2 kW at 400 V AC 50/60 Hz AC-42.2 kW at 220...230 V AC 50/60 Hz AC-34 kW at 380...400 V AC 50/60 Hz AC-35.5 kW at 500 V AC 50/60 Hz AC-35.5 kW at 660...690 V AC 50/60 Hz AC-34 kW at 415...440 V AC 50/60 Hz AC-3 motor power HP (UL / CSA)0.33 hp at 115 V AC 50/60 Hz for 1 phase motors1 hp at 230/240 V AC 50/60 Hz 1 phase motors2 hp at 200/208 V AC 50/60 Hz 3 phases motors2 hp at 230/240 V AC 50/60 Hz 3 phases motors5 hp at 460/480 V AC 50/60 Hz 3 phases motors7.5 hp at 575/600 V AC 50/60 Hz 3 phases motors control circuit typeAC 50/60 Hz [Uc] control circuit voltage110 V AC 50/60 Hz auxiliary contact composition1 NO + 1 NC [Uimp] rated impulse withstand voltage6 kV conforming to IEC 60947 overvoltage categoryIII [Ith] conventional free air thermal current16 A at <= 140 °F (60 °C) power circuit10 A at <= 140 °F (60 °C) signalling circuit Irms rated making capacity250 A at 440 V power circuit conforming to IEC 60947140 A AC signalling circuit conforming to IEC 60947-5-1250 A DC signalling circuit conforming to IEC 60947-5-1 rated breaking capacity250 A at 440 V power circuit conforming to IEC 60947 [Icw] rated short-time withstand current105 A <= 104 °F (40 °C) 10 s power circuit210 A <= 104 °F (40 °C) 1 s power circuit30 A <= 104 °F (40 °C) 10 min power circuit61 A <= 104 °F (40 °C) 1 min power circuit100 A 1 s signalling circuit120 A 500 ms signalling circuit140 A 100 ms signalling circuit associated fuse rating20 A gG at <= 690 V coordination type 2 power circuit25 A gG at <= 690 V coordination type 1 power circuit10 A gG signalling circuit conforming to IEC 60947-5-1 average impedance2.5 mOhm at 50 Hz - Ith 16 A power circuit [Ui] rated insulation voltage600 V power circuit certifications CSA600 V power circuit certifications UL690 V power circuit conforming to IEC 60947-4-1690 V signalling circuit conforming to IEC 60947-1600 V signalling circuit certifications CSA600 V signalling circuit certifications UL electrical durability0.6 Mcycles 25 A AC-1 at Ue <= 440 V2 Mcycles 9 A AC-3 at Ue <= 440 V power dissipation per pole0.2 W AC-31.56 W AC-1 safety coverWith mounting supportPlateRail standardsCSA C22.2 No 14EN 60947-4-1EN 60947-5-1IEC 60947-4-1IEC 60947-5-1UL 508 product certificationsBVCCCCSADNVGLGOSTLROS (Lloyds register of shipping)RINAUL connections - terminalsControl circuit: spring terminals 1 cable(s) 0 in² (2.5 mm²) - cable stiffness: flexible - without cable endControl circuit: spring terminals 2 cable(s) 0 in² (2.5 mm²) - cable stiffness: flexible - without cable endPower circuit: spring terminals 1 cable(s) 0 in² (2.5 mm²) - cable stiffness: flexible - without cable endPower circuit: spring terminals 2 cable(s) 0 in² (2.5 mm²) - cable stiffness: flexible - without cable end operating time4...19 ms opening12...22 ms closing safety reliability levelB10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1 mechanical durability15 Mcycles operating rate3600 cyc/h at <= 140 °F (60 °C) Complementary coil technologyWithout built-in suppressor module control circuit voltage limits0.3...0.6 Uc drop-out at 140 °F (60 °C), AC 50/60 Hz0.8...1.1 Uc operational at 140 °F (60 °C), AC 50 Hz0.85...1.1 Uc operational at 140 °F (60 °C), AC 60 Hz inrush power in VA70 VA at 68 °F (20 °C) (cos ϕ 0.75) 60 Hz70 VA at 68 °F (20 °C) (cos ϕ 0.75) 50 Hz hold-in power consumption in VA7.5 VA at 68 °F (20 °C) (cos ϕ 0.3) 60 Hz7 VA at 68 °F (20 °C) (cos ϕ 0.3) 50 Hz heat dissipation2...3 W at 50/60 Hz auxiliary contacts typeType mechanically linked (1 NO + 1 NC) conforming to IEC 60947-5-1Type mirror contact (1 NC) conforming to IEC 60947-4-1 signalling circuit frequency25...400 Hz minimum switching current5 mA signalling circuit minimum switching voltage17 V signalling circuit non-overlap time1.5 ms on energisation between NC and NO contact1.5 ms on de-energisation between NC and NO contact insulation resistance> 10 MOhm signalling circuit Environment IP degree of protectionIP20 front face conforming to IEC 60529 protective treatmentTH conforming to IEC 60068-2-30 pollution degree3 ambient air temperature for operation23...140 °F (-5...60 °C) ambient air temperature for storage-76...176 °F (-60...80 °C) permissible ambient air temperature around the device-40...158 °F (-40...70 °C) at Uc operating altitude9842.52 ft (3000 m) without derating in temperature fire resistance1562 °F (850 °C) conforming to IEC 60695-2-1 flame retardanceV1 conforming to UL 94 mechanical robustnessVibrations contactor open 2 Gn, 5...300 HzVibrations contactor closed 4 Gn, 5...300 HzShocks contactor open 10 Gn for 11 msShocks contactor closed 15 Gn for 11 ms height3.15 in (80 mm) width1.77 in (45 mm) depth3.39 in (86 mm) product weight0.71 lb(US) (0.32 kg) Ordering and shipping details Category22345 - CTR,D-LINE,OPEN,NONREV-NEW Discount ScheduleI12 GTIN00785901294368 Nbr. of units in pkg.1 Package weight(Lbs)0.81000000000000005 ReturnabilityN Country of originID Offer Sustainability California proposition 65WARNING: This product can expose you to chemicals including: - - - - - - - Substance 1Antimony oxide & Antimony trioxide, which is known to the State of California to cause cancer. - - - - - - - More informationFor more information go to www.p65warnings.ca.gov Contractual warranty Warranty period18 months
Documents and DownloadsLanguage
CADSizeAdd to My DocumentsIEC Contactor, 9-18a, 3 Pole, D-Line (TESYS), Spring Terminals
No results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.