View all Lexium ILA, ILE, ILS
integrated drive ILS with stepper motor - 24..36 V - Profibus DP - 3.5 AShow more characteristics
* Price is “List Price” and may be subject to a trade discount – check with your local distributor or retailer for actual price.
Product availabilityNon-Stock - Not normally stocked in distribution facility
Main range of productLexium integrated drive product or component typeMotion integrated drive device short nameILS motor type3-phase stepper motor number of motor poles6 PhaseSingle phase [Us] rated supply voltage24 V36 V network typeDC communication interfaceProfibus DP, integrated length4.01 in (101.9 mm) winding typeMedium speed of rotation and medium torque electrical connectionPrinted circuit board connector holding brakeWithout gear box typeWithout nominal speed1000 rpm 36 V500 rpm 24 V nominal torque3.98 lbf.in (0.45 N.m) holding torque4.51 lbf.in (0.51 N.m) Complementary transmission rate9.6, 19.2, 45.45, 93.75, 187.5, 500, 1500, 3000, 6000 and 12000 kbauds mounting supportFlange motor flange size2.24 in (57 mm) number of motor stacks1 centring collar diameter1.50 in (38.1 mm) centring collar depth0.06 in (1.6 mm) number of mounting holes4 mounting holes diameter0.20 in (5.2 mm) circle diameter of the mounting holes2.62 in (66.6 mm) feedback typeIndex pulse shaft endUntapped second shaftWithout second shaft end shaft diameter0.25 in (6.35 mm) shaft length0.83 in (21 mm) supply voltage limits18…40 V current consumption3500 mA maximum associated fuse rating10 A input/output type4 signals (each be used as input or output) voltage state 0 guaranteed-3...4.5 V voltage state 1 guaranteed15...30 V discrete input current10 mA at 24 V on/STO_A safety input3 mA at 24 V on/STO_B safety input2 mA at 24 V 24 V signal interface discrete output voltage23...25 V maximum switching current100 mA per output200 mA total protection typeShort circuit of the output voltageOverload of output voltageSafe torque off peak stall torque3.98 lbf.in (0.45 N.m) continuous stall torque3.98 lbf.in (0.45 N.m) speed feedback resolution20000 points/turn accuracy error+/- 6 arc min rotor inertia0.1 kg.cm² maximum mechanical speed3000 rpm maximum radial force Fr24 N maximum axial force Fa100 N tensile force)8.4 N force pressure) service life in hours20000 h bearing markingCE type of coolingNatural convection net weight2.87 lb(US) (1.3 kg) Environment standardsEN/IEC 61800-3IEC 60072-1EN 61800-3:2001, second environmentIEC 61800-3, Ed 2EN 50347EN/IEC 50178EN 61800-3 : 2001-02 product certificationsTÜVCULUL ambient air temperature for operation122…149 °F (50…65 °C) with power derating of 2 % per °C)32…122 °F (0…50 °C) without) permissible ambient air temperature around the device221 °F (105 °C) power amplifier230 °F (110 °C) motor ambient air temperature for storage-13…158 °F (-25…70 °C) operating altitude<= 3280.84 ft (1000 m) without relative humidity15…85 % without condensation vibration resistance20 m/s² 10…500 Hz) 10 cycles EN/IEC 60068-2-6 shock resistance150 m/s² 1000 shocks EN/IEC 60068-2-29 IP degree of protectionShaft bushing IP41 EN/IEC 60034-5Total except shaft bushing IP54 EN/IEC 60034-5 Ordering and shipping details Category18288 - LEXIUM INTEGRATED DRIVES II Discount SchedulePC56 GTIN03389119226820 Package weight(Lbs)1.49 kg (3.29 lb(US)) ReturnabilityNo Country of originDE Offer Sustainability Sustainable offer statusGreen Premium product California proposition 65WARNING: This product can expose you to chemicals including: Lead and lead compounds which is known to the State of California to cause Carcinogen & Reproductive harm. For more information go to www.p65warnings.ca.gov REACh Regulation EU RoHS DirectiveNot applicable, out of EU RoHS legal scope Mercury freeYes RoHS exemption information China RoHS Regulation Environmental Disclosure Circularity Profile WEEEThe product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins. Contractual warranty Warranty18 months
CatalogSizeAdd to My DocumentsUser guideSizeAdd to My DocumentsCADSizeAdd to My DocumentsCAD file (on TraceParts) for ILS1B571PB1A0: integrated drive ILS with stepper motor - 24..36 V - Profibus DP - 3.5 A (Version 2.0)End of Life InformationSizeAdd to My Documents
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.