servo motor SHS 100 4,0Nm,no brake,2k RPMShow more characteristics >
Product availabilityNon-Stock - Not normally stocked in distribution facility
Main range compatibilityPacDrive 3 product or component typeServo motor device short nameSHS encoder typeAbsolute multiturn SinCos Hiperface Complementary maximum mechanical speed6000 rpm [Us] rated supply voltage400 V PhaseThree phase continuous stall current2.2 A continuous stall torque4.65 N.m LXM624.65 N.m LXM52 continuous power840 W peak stall torque161.95 lbf.in (18.3 N.m) LXM62161.95 lbf.in (18.3 N.m) LXM52 nominal output power840 W LXM62840 W LXM52 nominal torque35.4 lbf.in (4 N.m) LXM6235.4 lbf.in (4 N.m) LXM52 nominal speed2000 rpm LXM622000 rpm LXM52 maximum current Irms9 A LXM629 A LXM52 maximum permanent current2 A product compatibilityLXM62 at 400 V, three phaseLXM52 at 400 V, three phase switching frequency8 kHz shaft endSmooth shaft shaft diameter0.75 in (19 mm) shaft length1.57 in (40 mm) key width0.24 in (6 mm) speed feedback resolution128 periods holding brakeWith holding torque6.75 N.m mounting supportFlange motor flange size3.94 in (100 mm) electrical connectionCable with stripped end back emf constant1.18 V/krpm at 68 °F (20 °C) number of motor poles77 rotor inertia2.31 kg.cm² stator resistance8.6 Ohm stator inductance45.7 mH maximum radial force Fr790 N at 2000 rpm maximum axial force Fa160 N type of coolingNatural convection length12.07 in (306.7 mm) centring collar diameter3.35 in (85 mm) centring collar depth0.14 in (3.5 mm) number of mounting holes4 mounting holes diameter0.31 in (8 mm) circle diameter of the mounting holes3.94 in (100 mm) product weight19.18 lb(US) (8.7 kg) Environment IP degree of protectionIP69K motor conforming to EN/IEC 60034-5IP67 motor conforming to EN/IEC 60034-5 Ordering and shipping details Category18359 - PACDRIVE3 SERVO MOTORS Discount SchedulePC52 Nbr. of units in pkg.1 Package weight(Lbs)19.199999999999999 ReturnabilityN
Documents and DownloadsLanguage
No results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.