servo motor SHS 071 1,4Nm,no brake,6k RPMShow more characteristics >
Product availabilityNon-Stock - Not normally stocked in distribution facility
Main range compatibilityPacDrive 3 product or component typeServo motor device short nameSHS encoder typeAbsolute multiturn SinCos Hiperface Complementary maximum mechanical speed8000 rpm [Us] rated supply voltage400 V PhaseThree phase continuous stall current2.9 A continuous stall torque17.7 lbf.in (2 N.m) LXM6217.7 lbf.in (2 N.m) LXM52 continuous power880 W peak stall torque67.26 lbf.in (7.6 N.m) LXM6267.26 lbf.in (7.6 N.m) LXM52 nominal output power880 W LXM62880 W LXM52 nominal torque12.39 lbf.in (1.4 N.m) LXM6212.39 lbf.in (1.4 N.m) LXM52 nominal speed6000 rpm LXM626000 rpm LXM52 maximum current Irms11.8 A LXM6211.8 A LXM52 maximum permanent current2.2 A product compatibilityLXM62 at 400 V, three phaseLXM52 at 400 V, three phase switching frequency8 kHz shaft endSmooth shaft shaft diameter0.43 in (11 mm) shaft length0.91 in (23 mm) key width0.16 in (4 mm) speed feedback resolution128 periods holding brakeWithout holding torque17.7 lbf.in (2 N.m) mounting supportFlange motor flange size2.8 in (71 mm) electrical connectionCable with stripped end back emf constant0.68 V/krpm at 68 °F (20 °C) number of motor poles48 rotor inertia0.41 kg.cm² stator resistance4.2 Ohm stator inductance19 mH maximum radial force Fr390 N at 6000 rpm maximum axial force Fa80 N type of coolingNatural convection length8.53 in (216.7 mm) centring collar diameter2.36 in (60 mm) centring collar depth0.1 in (2.5 mm) number of mounting holes4 mounting holes diameter0.24 in (6 mm) circle diameter of the mounting holes2.8 in (71 mm) product weight14.11 lb(US) (6.4 kg) Environment IP degree of protectionIP69K motor conforming to EN/IEC 60034-5IP67 motor conforming to EN/IEC 60034-5 Ordering and shipping details Category18359 - PACDRIVE3 SERVO MOTORS Discount SchedulePC52 Nbr. of units in pkg.1 Package weight(Lbs)14.1 ReturnabilityN
Documents and DownloadsLanguage
No results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.