discrete I/O module M340 - 8 I - 24 V DC - 8 O - solid state- severe environmentShow more characteristics >
Product availabilityNon-Stock - Not normally stocked in distribution facility
Main range of productModicon X80 product or component typeDiscrete I/O module product specific applicationFor severe environments discrete input number8 input typeCurrent sink (logic positive) discrete input voltage24 V DC positive discrete input current3.5 mA input compatibilityWith 2-wire/3-wire proximity sensors conforming to IEC 60947-5-2 discrete output number8 discrete output typeSolid state discrete output voltage24 V 19...30 V DC at 140 °F (60 °C)24 V 26.4 V DC at 158 °F (70 °C) discrete output current0.5 A Complementary sensor power supply26.4 V at 158 °F (70 °C)19...30 V voltage state 1 guaranteed>= 11 V current state 1 guaranteed>= 3 mA voltage state 0 guaranteed<= 5 V current state 0 guaranteed<= 1.5 mA current per channel0.625 A at 60 °C0.55 A at 158 °F (70 °C) current per module<= 4.4 A at <= 70 °C<= 5 A at <= 140 °F (60 °C) leakage current<= 0.5 mA at state 0 [Ures] residual voltage1.2 V at state 1 input impedance6800 Ohm insulation resistance> 10 MOhm 500 V DC power dissipation in W<= 3.7 W DC typical filtering time4 ms DC maximum filtering time7 ms response time on output1.2 ms paralleling of outputsYes : 2 maximum typical current consumption100 mA at 3.3 V DC30 mA at 24 V DC current consumption<= 111 mA at 3.3 V DC<= 67 mA at 24 V DC MTBF reliability447581 H protection typeOvervoltage protection on outputReverse polarity protection on inputReverse polarity protection on output1 external fuse per group of input channel 0.5 A fast blow output overload protectionWith electronic circuit breaker 1.5 In < Id < 2 InWith current limiter output overvoltage protectionWith transil diode output short-circuit protectionWith 2 A external fuse reverse polarity protectionReverse mounted diode voltage detection threshold< 14 V DC preactuator fault< 14 V DC sensor fault> 18 V DC preactuator OK> 18 V DC sensor OK tungsten load<= 6 W switching frequency0.5/LI² Hz overload time<= 15 ms load impedance ohmic<= 48 Ohm status LED1 LED green module operating (RUN)1 LED per channel green channel diagnostic1 LED red module I/O1 LED red module error (ERR) product weight0.25 lb(US) (0.115 kg) Environment IP degree of protectionIP20 product certificationsATEXCECSAULRCMIEC-ExMerchant NavyEAC standardsEN/IEC 61131-2EN/IEC 61010-2-201UL 61010-2-201CSA C22.2 No 61010-2-201 dielectric strength1500 V AC at 50/60 Hz 1 minute, output/ground1500 V AC at 50/60 Hz 1 minute, output/internal logic1500 V AC at 50/60 Hz 1 minute, primary/secondary500 V DC 1 minute, between group of inputs and outputs vibration resistance3 gn shock resistance30 gn ambient air temperature for storage-40...185 °F (-40...85 °C) ambient air temperature for operation-13...158 °F (-25...70 °C) relative humidity5...95 % without condensation 55 °C protective treatmentConformal coating Humiseal 1A33TC environmental characteristicCorrosion resistanceDust resistant operating altitude0...6561.68 ft (0...2000 m)2000...5000 m (with derating factor) Ordering and shipping details Category18160 - MODICON M340 Discount SchedulePC34 Nbr. of units in pkg.1 Package weight(Lbs)1 ReturnabilityN Country of originFR Offer Sustainability Sustainable offer statusGreen Premium product RoHS (date code: YYWW) REACh Product environmental profile Product end of life instructionsAvailable California proposition 65WARNING: This product can expose you to chemicals including: - - - - - - - Substance 1Lead and lead compounds which is known to the State of California to cause cancer and birth defects or other reproductive harm. - - - - - - - More informationFor more information go to www.p65warnings.ca.gov Contractual warranty Warranty period18 months
Documents and DownloadsLanguage
User guideSizeAdd to My DocumentsCertificateSizeAdd to My DocumentsDCC_EAC_M340_M580_X80_PS_SEP2016 DCC_EAC_M340_M580_X80_SEP2016ATEX_14ATEX3025X_M340_M580_X80_JUL2017 IECEX_INE14.0070X_M340_M580_X80_JUL2017 ATEX_INSTRUCTIONS_DCE_M340_M580_X80_JUL2017
No results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Dimensions DrawingsModules Mounted on RacksDimensions(1)With removable terminal block (cage, screw or spring).(2)With FCN connector.(3)On AM1 ED rail: 35 mm wide, 15 mm deep. Only possible with BMXXBP0400/0400H/0600/0600H/0800/0800H rack.
a in mm
a in in.
BMXXBP0400 and BMXXBP0400H
BMXXBP0600 and BMXXBP0600H
BMXXBP0800 and BMXXBP0800H
BMXXBP1200 and BMXXBP1200H
Connections and SchemaConnecting the ModuleInput Circuit DiagramOutput Circuit DiagramModule Connectionpower supply24 VDCinput fusefast blow fuse of 0.5 Aoutput fusefast blow fuse of 6.3 Apre-actpre-actuator