servo motor BMH - 34.4 Nm - 3800 rpm - keyed shaft - with brake - IP54Show more characteristics >
Product availabilityNon-Stock - Not normally stocked in distribution facility
Main product or component typeServo motor device short nameBMH maximum mechanical speed3800 rpm continuous stall torque304.42 lbf.in (34.4 N.m) for LXM32.D72N4 24 A at 400 V three phase304.42 lbf.in (34.4 N.m) for LXM32.D72N4 24 A at 480 V three phase peak stall torque915.04 lbf.in (103.4 N.m) for LXM32.D72N4 24 A at 400 V three phase915.04 lbf.in (103.4 N.m) for LXM32.D72N4 24 A at 480 V three phase nominal output power5400 W for LXM32.D72N4 24 A at 400 V three phase5400 W for LXM32.D72N4 24 A at 480 V three phase nominal torque228.32 lbf.in (25.8 N.m) for LXM32.D72N4 24 A at 400 V three phase228.32 lbf.in (25.8 N.m) for LXM32.D72N4 24 A at 480 V three phase nominal speed2000 rpm for LXM32.D72N4 24 A at 480 V three phase2000 rpm for LXM32.D72N4 24 A at 400 V three phase product compatibilityLXM32.D72N4 at 400...480 V three phase shaft endKeyed IP degree of protectionIP54 (standard) speed feedback resolution32768 points/turn x 4096 turns holding brakeWith mounting supportInternational standard flange electrical connectionRotatable right-angled connectors Complementary range compatibilityLexium 32 [Us] rated supply voltage480 V PhaseThree phase continuous stall current21.5 A continuous power6.8 W maximum current Irms72 A LXM32.D72N4 maximum permanent current78.1 A second shaftWithout second shaft end shaft diameter1.5 in (38 mm) shaft length3.15 in (80 mm) key width2.76 in (70 mm) feedback typeMultiturn SinCos Hiperface holding torque707.96 lbf.in (80 N.m) (holding brake) motor flange size8.07 in (205 mm) number of motor stacks1 back emf constant104 V/krpm at 248 °F (120 °C) number of motor poles10 rotor inertia87.4 kg.cm² stator resistance0.3 Ohm at 68 °F (20 °C) stator inductance5.9 mH at 68 °F (20 °C) stator electrical time constant19.7 ms at 68 °F (20 °C) maximum radial force Fr2580 N at 3000 rpm2960 N at 2000 rpm3730 N at 1000 rpm maximum axial force Fa0.2 x Fr brake pull-in power40 W type of coolingNatural convection length14.59 in (370.5 mm) centring collar diameter7.09 in (180 mm) centring collar depth0.16 in (4 mm) number of mounting holes4 mounting holes diameter0.55 in (14 mm) circle diameter of the mounting holes8.46 in (215 mm) product weight83.56 lb(US) (37.9 kg) Ordering and shipping details Category18282 - LEXIUM 32 MOTORS Discount SchedulePC53 GTIN003606485203010 Nbr. of units in pkg.1 Package weight(Lbs)94.600000000000009 ReturnabilityN Country of originDE Offer Sustainability Sustainable offer statusGreen Premium product RoHS (date code: YYWW) REACh Product environmental profileAvailable Product end of life instructionsNeed no specific recycling operations California proposition 65WARNING: This product can expose you to chemicals including: - - - - - - - Substance 1Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. - - - - - - - More informationFor more information go to www.p65warnings.ca.gov Contractual warranty Warranty period18 months
Documents and DownloadsLanguage
No results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.