Lexium 32 Servo Drives & Motors - BMH0703T06F2A

Servo motors

servo motor BMH - 3.4 Nm - 8000 rpm - untapped shaft - with brake - IP54

Product availability

Non-Stock - Not normally stocked in distribution facility

Add to My Products Remove from My Products

Compare

Main
product or component type	Servo motor
device short name	BMH
maximum mechanical speed	8000 rpm
continuous stall torque	30.09 lbf.in (3.4 N.m) for LXM32.D30M2 10 A at 115 V single phase 30.09 lbf.in (3.4 N.m) for LXM32.D18M2 6 A at 230 V single phase
peak stall torque	76.99 lbf.in (8.7 N.m) for LXM32.D30M2 10 A at 115 V single phase 90.27 lbf.in (10.2 N.m) for LXM32.D18M2 6 A at 230 V single phase
nominal output power	900 W for LXM32.D18M2 6 A at 230 V single phase 650 W for LXM32.D30M2 10 A at 115 V single phase
nominal torque	27.43 lbf.in (3.1 N.m) for LXM32.D30M2 10 A at 115 V single phase 25.66 lbf.in (2.9 N.m) for LXM32.D18M2 6 A at 230 V single phase
nominal speed	2000 rpm for LXM32.D30M2 10 A at 115 V single phase 3000 rpm for LXM32.D18M2 6 A at 230 V single phase
product compatibility	LXM32.D30M2 at 115 V single phase LXM32.D18M2 at 230 V single phase
shaft end	Smooth shaft
IP degree of protection	IP54 (standard)
speed feedback resolution	32768 points/turn
holding brake	With
mounting support	International standard flange
electrical connection	Rotatable right-angled connectors

Complementary
range compatibility	Lexium 32
[Us] rated supply voltage	240 V
Phase	Three phase
continuous stall current	5.55 A
continuous power	1.68 W
maximum current Irms	15 A LXM32.D30M2 17.8 A for LXM32.D18M2
maximum permanent current	17.84 A
second shaft	Without second shaft end
shaft diameter	0.55 in (14 mm)
shaft length	1.18 in (30 mm)
feedback type	Single turn SinCos Hiperface
holding torque	26.55 lbf.in (3 N.m) (holding brake)
motor flange size	2.76 in (70 mm)
number of motor stacks	3
torque constant	0.61 N.m/A at 248 °F (120 °C)
back emf constant	39.3 V/krpm at 248 °F (120 °C)
number of motor poles	10
rotor inertia	1.78 kg.cm²
stator resistance	1.32 Ohm at 68 °F (20 °C)
stator inductance	4.3 mH at 68 °F (20 °C)
stator electrical time constant	3.3 ms at 68 °F (20 °C)
maximum radial force Fr	400 N at 6000 rpm 430 N at 5000 rpm 460 N at 4000 rpm 510 N at 3000 rpm 580 N at 2000 rpm 730 N at 1000 rpm
maximum axial force Fa	0.2 x Fr
brake pull-in power	7 W
type of cooling	Natural convection
length	8.86 in (225 mm)
centring collar diameter	2.36 in (60 mm)
centring collar depth	0.1 in (2.5 mm)
number of mounting holes	4
mounting holes diameter	0.22 in (5.5 mm)
circle diameter of the mounting holes	3.23 in (82 mm)
product weight	8.82 lb(US) (4 kg)

Offer Sustainability
Sustainable offer status	Green Premium product
RoHS (date code: YYWW)	Schneider Electric declaration of conformity
REACh	Reference not containing SVHC above the threshold
Product environmental profile	Available
Product end of life instructions	Need no specific recycling operations
California proposition 65	WARNING: This product can expose you to chemicals including:
- - - - - - - Substance 1	Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm.
- - - - - - - More information	For more information go to www.p65warnings.ca.gov

Contractual warranty
Warranty period	18 months