variable speed drive, ATV930, 22kW/30HP, 500V/690V, IP00Show more characteristics >
Product availabilityStock - Normally stocked in distribution facility
Main range of productAltivar Process ATV900 product or component typeVariable speed drive device applicationIndustrial application device short nameATV930 variantWith braking chopperStandard version product destinationAsynchronous motorsSynchronous motors mounting modeWall mount EMC filterIntegrated conforming to EN/IEC 61800-3 category C3 with <= 25 m motor cable maxi IP degree of protectionIP00 conforming to IEC 61800-5-1 type of coolingForced convection supply frequency50...60 Hz (+/- 5 %) network number of phases3 phases [Us] rated supply voltage500...690 V (- 15...10 %) motor power kW18.5 kW at 500 V (normal duty) motor power hp25 hp at 500 V (normal duty) line current27.6 A at 500 V (normal duty) prospective line Isc70 kA apparent power31.1 kVA at 690 V (normal duty) continuous output current29 A at 4 kHz (normal duty) maximum transient current34.8 A during 60 s (normal duty) asynchronous motor control profileOptimized torque modeConstant torque standardVariable torque standard synchronous motor control profileSynchronous reluctance motorPermanent magnet motor speed drive output frequency0.1...599 Hz nominal switching frequency4 kHz switching frequency2...8 kHz adjustable safety functionSTO (safe torque off) SIL 3 number of preset speeds16 preset speeds communication port protocolEthernet/IPModbus TCPModbus serial option moduleSlot A: communication module Profibus DP V1Slot A: communication module ProfinetSlot A: communication module DeviceNetSlot A: communication module CANopen daisy chain RJ45Slot A: communication module CANopen SUB-D 9Slot A: communication module CANopen screw terminalsSlot A: communication module EtherCATSlot A/slot B/slot C: digital and analog I/O extension moduleSlot A/slot B/slot C: output relay extension moduleSlot B: 5/12 V digital encoder interface moduleSlot B: analog encoder interface moduleSlot B: resolver encoder interface module Complementary output voltage<= power supply voltage motor slip compensationCan be suppressedNot available in permanent magnet motor lawAdjustableAutomatic whatever the load acceleration and deceleration rampsLinear adjustable separately from 0.01...9999 sS, U or customized braking to standstillBy DC injection protection typeMotor: thermal protectionMotor: safe torque offMotor: motor phase breakDrive: thermal protectionDrive: safe torque offDrive: overheatingDrive: overcurrent between output phases and earthDrive: overload of output voltageDrive: short-circuit protectionDrive: motor phase breakDrive: overvoltages on the DC busDrive: line supply overvoltageDrive: line supply undervoltageDrive: line supply phase lossDrive: overspeedDrive: break on the control circuit frequency resolutionDisplay unit: 0.1 HzAnalog input: 0.012/50 Hz electrical connectionControl, screw terminal: 0.5...1.5 mm² (AWG 20...AWG 16) connector type2 RJ45 (on the control block) Ethernet IP/Modbus TCP physical interface2-wire RS 485 Modbus serial transmission frameRTU Modbus serial transmission rate10/100 Mbit/s Ethernet IP/Modbus TCP4.8, 9.6, 19.2, 38.4 kbit/s for Modbus serial exchange modeHalf duplex, full duplex, autonegotiation Ethernet IP/Modbus TCP data format8 bits, configurable odd, even or no parity Modbus serial type of polarizationNo impedance Modbus serial number of addressesFor Modbus serial method of accessSlave Modbus TCP supplyExternal supply for digital inputs: 24 V DC (19...30 V) current <= 1.25 mA (overload and short-circuit protection) local signalling3 mono/dual colour LED for local diagnostic width9.69 in (246 mm) height16.54 in (420 mm) depth9.53 in (242 mm) product weight48.5 lb(US) (22 kg) analogue input number3 analogue input typeSoftware-configurable voltage AI1, AI2, AI3: 0...10 V DC impedance 30 kOhm, resolution 12 bits discrete input number10 discrete input typeProgrammable DI1...DI8: 24 V DC (<= 30 V) impedance 3.5 kOhm input compatibilityDiscrete input DI1...DI8: level 1 PLC conforming to EN/IEC 61131-2 analogue output number2 discrete output number2 discrete output typeLogic output DQ+ : 0...1 kHz (<= 30 V) DC, 100 mA sampling durationDiscrete input DI1...DI8: 2 ms (+/- 0.5 ms) accuracyAnalog input AI1, AI2, AI3: +/- 0.6 % for a temperature variation 60 °CAnalog output AQ1, AQ2: +/- 1 % for a temperature variation 60 °C linearity errorAnalog input AI1, AI2, AI3: +/- 0.15 % of maximum value maximum switching currentRelay output R1 on resistive load (cos phi = 1) : 3 A at 250 V AC relay output number3 relay output typeConfigurable relay logic R1: fault relay NO/NC electrical durability 100000 cycles refresh timeRelay output R1, R2, R3: 5 ms (+/- 0.5 ms) minimum switching currentRelay output R1, R2, R3: 5 mA at 24 V DC isolationBetween power and control terminals IP degree of protectionIP21 Environment insulation resistance> 1 mOhm at 500 V DC for 1 minute to earth noise level58 dB conforming to 86/188/EEC power dissipation in W463 W (forced convection) at 500 V switching frequency 4 kHz vibration resistance1.5 mm peak to peak (f = 2...13 Hz) conforming to IEC 60068-2-61 gn (f = 13...200 Hz) conforming to IEC 60068-2-6 shock resistance15 gn during 11 ms conforming to IEC 60068-2-27 volume of cooling air87178.34 Gal/hr(US) (330 m3/h) operating positionVertical +/- 10 degree electromagnetic compatibility1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6 pollution degree2 EN/IEC 61800-5-1 environmental characteristicChemical pollution resistance class 3C3 conforming to EN/IEC 60721-3-3Dust pollution resistance class 3S3 conforming to EN/IEC 60721-3-3 relative humidity5...95 % without condensation conforming to IEC 60068-2-3 ambient air temperature for operation-15...50 °C without122...140 °F (50...60 °C) with derating factor ambient air temperature for storage-40...158 °F (-40...70 °C) operating altitude1000...4800 m with current derating 1 % per 100 m standardsEN/IEC 61800-3UL 508CEN/IEC 61800-5-1IEC 61000-3-12IEC 60721-3IEC 61508IEC 13849-1EN/IEC 61800-3 (environment 2 category C3) product certificationsCSAREACHTÜVUL markingCE Ordering and shipping details Category22276 - ATV930 FRAMES 1 & 2 Discount ScheduleCP4E GTIN00785901022602 Nbr. of units in pkg.1 Package weight(Lbs)21000 ReturnabilityY Country of originIN Offer Sustainability Sustainable offer statusGreen Premium product RoHS (date code: YYWW)Compliant - since 1728 - Schneider Electric declaration of conformity
Schneider Electric declaration of conformity
REACh Product environmental profileAvailable
End of Life Information
Product end of life instructionsAvailable California proposition 65WARNING: This product can expose you to chemicals including: - - - - - - - Substance 1Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. - - - - - - - Substance 2Bisphenol A (BPA), which is known to the State of California to cause birth defects or other reproductive harm. - - - - - - - More informationFor more information go to www.p65warnings.ca.gov
Documents and DownloadsLanguage
CertificateSizeAdd to My DocumentsInstruction SheetSizeAdd to My DocumentsEDS FilesSizeAdd to My DocumentsEnd of Life InformationSizeAdd to My Documents
No results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Dimensions DrawingsDimensionsDrives without Top Cover
Front View with EMC Plate, Front, Left and Rear View without EMC PlateDrives with IP20 Top Cover
Front, Left and Rear View
Mounting and ClearanceClearances
≥ 100 mm (3.94 in.)
≥ 100 mm (3.94 in.)
≥ 10 mm (0.39 in.)
Mounting TypesMounting Type A: Individual IP21a ≥0Mounting Type B: Side by Side IP20Mounting Type C: Individual IP20a ≥0
Mount the device in a vertical position (±10°). This is required for cooling the device.
Do not mount the device close to heat sources.
Leave sufficient free space so that the air required for cooling purposes can circulate from the bottom to the top of the drive.
Connections and SchemaThree-Phase Power Supply with Upstream Breaking via Line Contactor
Connection diagrams conforming to standards EN 954-1 category 1 and IEC/EN 61508 capacity SIL1, stopping category 0 in accordance with standard IEC/EN 60204-1(1)Line choke if used(2)Use relay R1 set to operating state Fault to switch Off the product once an error is detected.A1 :DriveKM1 :Line ContactorQ2, Q3 :Circuit breakersS1, S2 :PushbuttonsT1 :Transformer for control partThree-Phase Power Supply with Downstream Breaking via Contactor
Connection diagrams conforming to standards EN 954-1 category 1 and IEC/EN 61508 capacity SIL1, stopping category 0 in accordance with standard IEC/EN 60204-1(1)Line choke if used(2)Use relay R1 set to operating state Fault to switch Off the product once an error is detected.A1 :DriveKM1 :ContactorControl Block Wiring Diagram(1)Safe Torque Off(2)Analog Output(3)Digital Input(4)Reference potentiometer(5)Analog Input(6)Digital Output(7)0-10 Vdc, x-20 mA(8)0-10 Vdc, -10 Vdc...+10 VdcR1A, R1B, R1C :Fault relayR2A, R2C :Sequence relayR3A, R3C :Sequence relaySensor Connection
It is possible to connect either 1 or 3 sensors on terminals AI1 or AI3Sink / Source Switch Configuration
The switch is used to adapt the operation of the logic inputs to the technology of the programmable controller outputs.
Switch Set to SRC (Source) Position Using the Output Power Supply for the Digital InputsSwitch Set to SRC (Source) Position and Use of an External Power Supply for the DIsSwitch Set to SK (Sink) Position Using the Output Power Supply for the Digital InputsSwitch Set to EXT Position Using an External Power Supply for the DIs
Set the switch to Source (factory setting) if using PLC outputs with PNP transistors.
Set the switch to Ext if using PLC outputs with NPN transistors.
Performance CurvesDerating Curves40 °C (104 °F) - Mounting type A, B and C50 °C (122 °F) - Mounting type A, B and C60 °C (140 °F) - Mounting type B and CIn :Nominal Drive CurrentSF :Switching Frequency