Overview DescriptionFree up space and secure power cords between rack-mount PDUs and attached IT equipment with this exclusive easy-to-use cord retention method. While these cords will fit into any standard IEC receptacle or power inlet; the "locking" feature is enabled only when used with APC AP8000 series Rack PDUs or IT equipment with built-in locking receptacles. These locking connectors reduce the probability of accidentally disconnecting cords and dropping loads. Model NamePower Cord, Locking C19 to 5-20P, 3.0m Standard Lead TimeUsually in Stock Product DistributionCanada , United States Output Nominal Output Voltage120V Maximum Total Current Draw per Phase20 A Output Connections(1) IEC 320 C19 (Battery Backup) Always on Outlets0 Cord Length10 Input Input ConnectionsNEMA 5-20P Cord Length9.84 feet (3 meters) Number of Power Cords1 Maximum Line Current per phase20 A Maximum Input Current per phase20 A Load Capacity0 VA Physical Net Weight1.57 lbs (0.71 kg) Maximum Height9.06 inches (230.0 mm) Maximum Width9.06 inches (230.0 mm) Maximum Depth1.77 inches (45.0 mm) Shipping Weight1.57 lbs (0.71 kg) Shipping Height9.06 inches (230.0 mm) Shipping Width9.06 inches (230.0 mm) Shipping Depth1.77 inches (45.0 mm) ColorBlack Environmental Operating Environment32 - 221 °F (0 - 105 °C) Operating Relative Humidity20 - 80 % Operating Elevation0-10000 feet (0-3000 meters) Storage Temperature-13 - 221 °F (-25 - 105 °C) Storage Relative Humidity20 - 80 % Storage Elevation0-50000 feet (0-15000 meters) Conformance ApprovalsCSA , UL Listed Standard warranty2 years repair or replace Sustainable Offer Status RoHSCompliant REACHREACH: Contains No SVHCs
Documents and DownloadsLanguage
No results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.