Welcome to our website.
To view product availability in a specific country, select from the country list below. For Investor Relations, please visit our global site.
|range of product||
|product or component type||
|power supply type||
Regulated switch mode
100...120 V AC single phase, terminal(s): N-L1200...500 V AC phase to phase, terminal(s): L1-L2
24 V DC
|rated power in W||
Power factor correction filter conforming to IEC 61000-3-2
|power supply output current||
|output protection type||
Against overload, protection technology: manual or automatic resetAgainst overvoltage, protection technology: 30...32 V, manual resetAgainst short-circuits, protection technology: manual or automatic resetAgainst undervoltage, protection technology: tripping if U < 21.6 VThermal, protection technology: automatic reset
|ambient air temperature for operation||
122...140 °F (50...60 °C) with-13...122 °F (-25...50 °C) without
|input voltage limits||
170...550 V85...132 V
30 A for 2 ms
0.51 at 240 V0.59 at 120 V
|output voltage limits||
24...28.8 V adjustable
|power dissipation in W||
|line and load regulation||
>= 120 ms at 400 V>= 20 ms at 100 V>= 40 ms at 240 V
|permissible temporary current boost||
1.5 x In for 4 s
|connections - terminals||
Screw type terminals input connection, connection capacity: 3 x 0.5...3 x 4 mm² AWG 22...AWG 12Screw type terminals input ground connection, connection capacity: 1 x 0.5...1 x 4 mm² AWG 22...AWG 12Screw type terminals output connection, connection capacity: 4 x 0.5...4 x 4 mm² AWG 22...AWG 12Screw type terminals output ground connection, connection capacity: 1 x 0.5...1 x 4 mm² AWG 22...AWG 12Removable screw terminal block diagnostic relay, connection capacity: 2 x 2.5 mm²
35 x 15 mm symmetrical DIN rail35 x 7.5 mm symmetrical DIN rail
6561.68 ft (2000 m)
|name of test||
Harmonic current emission conforming to EN/IEC 61000-3-2Conducted emissions on the power line conforming to EN 55022 Class BElectrostatic discharges conforming to EN/IEC 61000-4-2Induced electromagnetic field conforming to EN/IEC 61000-4-6Magnetic field conforming to EN 61000-4-8Primary outage conforming to IEC 61000-4-11Radiated electromagnetic field conforming to EN/IEC 61000-4-3Radiated emissions conforming to EN 55022 Class BRapid transient conforming to IEC 61000-4-4Surge conforming to EN/IEC 61000-4-5
1 LED green and red output voltage1 LED green, red and orange output current
4.92 in (125 mm)
5.63 in (143 mm)
2.2 in (56 mm)
1.54 lb(US) (0.7 kg)
UL 508CSA C22.2 No 60950-1
EMC conforming to EN 61000-6-1EMC conforming to EN 61000-6-3EMC conforming to EN/IEC 61000-6-2EMC conforming to EN/IEC 61000-6-4EMC conforming to EN/IEC 61204-3Safety conforming to EN/IEC 60950-1Safety conforming to EN/IEC 61204-3Safety conforming to SELV
|IP degree of protection||
IP20 conforming to EN/IEC 60529
|ambient air temperature for storage||
-40...158 °F (-40...70 °C)
0...90 % during operation0...95 % in storage
Class I conforming to VDE 0106-1
Between input and groundBetween output and groundBetween input and output
915000 H at 100 V AC with UTE C80-810 calculation method950000 H at 200...500 V AC with UTE C80-810 calculation method
22525 - ABL8 AND ABL7 POWER SUPPLIE
|Nbr. of units in pkg.||
|Country of origin||
|Sustainable offer status||
Green Premium product
|RoHS (date code: YYWW)||
Compliant - since 0501 - Schneider Electric declaration of conformity Schneider Electric declaration of conformity
|Product environmental profile||
|Product end of life instructions||
|California proposition 65||
WARNING: This product can expose you to chemicals including:
|- - - - - - - Substance 1||
Lead and lead compounds which is known to the State of California to cause cancer and birth defects or other reproductive harm.
|- - - - - - - More information||
For more information go to www.p65warnings.ca.gov
a in mm
a in in.
b in mm
b in in.
Single-phase (L-N) 100 to 120 V
Phase-to-phase (L1-L2) 200 to 500 V
Single-phase (L-N) 200 to 500 V
2 products max. (1)
2 products max.
Series or parallel connection is only recommended for products with identical references.
For better availability, the power supplies can also be connected in parallel using the ABL8RED24400 Redundancy module.
The ambient temperature is a determining factor that limits the power an electronic power supply can deliver continuously. If the temperature around the electronic components is too high, their life will be significantly reduced.
The nominal ambient temperature for the Universal range of Phaseo power supplies is 50°C. Above this temperature, derating is necessary up to a maximum temperature of 60°C.
The graph below shows the power (in relation to the nominal power) that the power supply can deliver continuously, depending on the ambient temperature.
ABL 8RPM, ABL 8RPS, ABL 8WPS mounted vertically
Derating should be considered in extreme operating conditions:
Intensive operation (output current permanently close to the nominal current, combined with a high ambient temperature)
Output voltage set above 24 Vdc (to compensate for line voltage drops, for example)
Parallel connection to increase the total power
Manual Reset Protection Mode
Automatic Reset Protection Mode
“Boost” Repeat Accuracy
This type of operation is described in detail in the user manual, which can be downloaded from the website.