Sub-base with plug-in electromechanical relay ABE7 - 16 channels - relay 10 mmShow more characteristics >
Product availabilityNon-Stock - Not normally stocked in distribution facility
Main range of productAdvantys Telefast ABE7 product or component typeSub-base with plug-in electromechanical relay sub-base typeOutput sub-base [Us] rated supply voltage19...30 V conforming to IEC 61131-2 number of channels16 Complementary supply voltage typeDC product compatibilityABR7S23 contacts type and composition1 C/O status LED1 LED per channel, green channel status1 LED, green power ON polarity distributionVolt-free short-circuit protection1 A internal fuse, 5 x 20 mm, fast blow (PLC end)0.5 A fuse per channel, 5 x 20 mm, fast blow (output circuit) fixing modeBy clips on 35 mm symmetrical DIN railBy screws on solid plate with fixing kit supply current<= 1 A voltage drop on power supply fuse0.3 V [Ui] rated insulation voltage2000 V between terminals/mounting rails300 V between coil circuit/contact circuits conforming to IEC 60947-1 [Uimp] rated impulse withstand voltage2.5 kV installation categoryII conforming to IEC 60664-1 tightening torque5.31 lbf.in (0.6 N.m) (withflat Ø 3.5 mm product weight1.71 lb(US) (0.775 kg) Environment product certificationsBVCSADNVGLLROS (Lloyds register of shipping)UL IP degree of protectionIP2x conforming to IEC 60529 resistance to incandescent wire1382 °F (750 °C) conforming to IEC 60695-2-11 shock resistance15 gn 11 ms conforming to IEC 60068-2-27 vibration resistance2 gn (f = 10...150 Hz) conforming to IEC 60068-2-6 resistance to electrostatic discharge4 kV (contact) conforming to IEC 61000-4-2 level 38 kV (air) conforming to IEC 61000-4-2 level 3 resistance to radiated fields9.14 V/yd (10 V/m) (26000000...1000000000 Hz) conforming to IEC 61000-4-3 level 3 resistance to fast transients2 kV conforming to IEC 61000-4-4 level 3 ambient air temperature for operation23...140 °F (-5...60 °C) conforming to IEC 61131-2 ambient air temperature for storage-40...176 °F (-40...80 °C) conforming to IEC 61131-2 pollution degree2 conforming to IEC 60664-1 Ordering and shipping details Category22375 - INTERFACE MODULE(ABA,R,S) Discount ScheduleCP2 GTIN00785901297758 Nbr. of units in pkg.1 Package weight(Lbs)1.72 ReturnabilityN Country of originLV Offer Sustainability Sustainable offer statusGreen Premium product RoHS (date code: YYWW)Compliant - since 0841 - Schneider Electric declaration of conformity
Schneider Electric declaration of conformity
REACh Product environmental profileAvailable Product end of life instructionsAvailable California proposition 65WARNING: This product can expose you to chemicals including: - - - - - - - Substance 1Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. - - - - - - - More informationFor more information go to www.p65warnings.ca.gov Contractual warranty Warranty period18 months
Documents and DownloadsLanguage
CatalogSizeAdd to My Documents
No results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Dimensions DrawingsDimensions(1)ABE7BV10 / BV20, ABE7BV10E / BV20E
Mounting and ClearanceMounting
Connections and SchemaWiring Diagram(1)16 channels
Performance CurvesCurves for Determining Cable Type and Length According to the Current16-channel Sub-baseLCable lengthITTotal current per sub base (A)IAAverage current per channel (mA)(1)TSXCDP••2 and ABFH20H••0 cables with c.s.a. 0.08 mm2 (AWG 28).(2)TSXCDP••3 cables with c.s.a. 0.34 mm2 (AWG 22).(3)Cables with c.s.a. 0.13 mm2 (AWG 26).
The curves are given for a voltage drop of 1 V in the cable. For n volts tolerance, multiply the length determined from the graph by n.Electrical Durability (in Millions of Operating Cycles) Conforming to IEC 60947-5-1
Multiply all durability values by 0.75 for ABR7S23.DC Loads
DC12 curvesDC12control of resistive loads and of solid state loads isolated by optocoupler, l/R ≤ 1 ms.
DC13 curvesDC13switching electromagnets, L/R ≤ 2 x (Ue x Ie) in ms, Ue: rated operational voltage, Ie: rated operational current (with a protective diode on the load, DC12 curves must be used with a coefficient of 0.9 applied to the number in millions of operating cycles)AC Loads
AC12 curvesAC12control of resistive loads and of solid state loads isolated by optocoupler, cos ϕ ≥ 0.9.
AC14 curvesAC14control of small electromagnetic loads ≤ 72 VA, make: cos ϕ = 0.3, break: cos ϕ = 0.3.
AC15 curvesAC15control of electromagnetic loads > 72 VA, make: cos ϕ = 0.7, break: cos ϕ = 0.4.