Interfaces for PLCs
Interfaces for PLCs
sub-base for plug-in relay ABE7 - 16 channels - relay 12.5 mm
- Price590.00 USD
No results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Dimensions DrawingsDimensions(1)ABE7BV10 / BV20, ABE7BV10E / BV20E
Mounting and ClearanceMounting
Connections and SchemaHE10 16 ChannelsWiring Diagram(1)Inductive load(2)Fuse only for ABE7P16T334(3)ABR7S33 (1 "OF" "DPDT") Ith = 10 A (supplied)(4)ABS7SC3E (5...48 VDC) Imax. = 1.5 A (not supplied)(5)ABS7SA3M (24...240 VAC) Imax. = 1.5 A (not supplied)(6)ABS7SC3BA (24 VDC) Imax. = 2 A (not supplied)(7)ABE7ACC21 (24 VDC) Imax. = 0.5 A (not supplied)
Performance CurvesCurves for Determining Cable Type and Length According to the Current16-channel Sub-baseLCable lengthITTotal current per sub base (A)IAAverage current per channel (mA)(1)TSXCDP••2 and ABFH20H••0 cables with c.s.a. 0.08 mm2 (AWG 28).(2)TSXCDP••3 cables with c.s.a. 0.34 mm2 (AWG 22).(3)Cables with c.s.a. 0.13 mm2 (AWG 26).
The curves are given for a voltage drop of 1 V in the cable. For n volts tolerance, multiply the length determined from the graph by n.Temperature Derating Curves(1)100 % of channels used(2)50 % of channels usedElectrical Durability (in Millions of Operating Cycles) Conforming to IEC 60947-5-1DC Loads
DC12 curvesDC12control of resistive loads and of solid state loads isolated by optocoupler, l/R ≤ 1 ms.
DC13 curvesDC13switching electromagnets, L/R ≤ 2 x (Ue x Ie) in ms, Ue: rated operational voltage, Ie: rated operational current (with a protective diode on the load, DC12 curves must be used with a coefficient of 0.9 applied to the number in millions of operating cycles)AC Loads
AC12 curvesAC12control of resistive loads and of solid state loads isolated by optocoupler, cos ϕ ≥ 0.9.
AC14 curvesAC14control of small electromagnetic loads ≤ 72 VA, make: cos ϕ = 0.3, break: cos ϕ = 0.3.
AC15 curvesAC15control of electromagnetic loads > 72 VA, make: cos ϕ = 0.7, break: cos ϕ = 0.4.