distributed analog/discrete I/O Modicon MomentumShow more characteristics >
Product availabilityStock - Normally stocked in distribution facility
Main range of productModicon Momentum automation platform product or component typeAnalogue,discrete I/O base group of channels1 group of 4 analog outputs1 group of 6 analog inputs1 group of 8 discrete outputs2 groups of 4 discrete inputs analogue input range0...10 V analogue input typeSingle ended analogue input resolution14 bits 0...10 V discrete input voltage24 V DC analogue output range0...10 V 14 bits discrete output voltage10...30 V output short-circuit protectionWith discrete output output overload protectionWith discrete output Complementary discrete input number8 IEC 1131-2 Type 2 [Us] rated supply voltage24 V 19.2...30 V DC analogue input voltage<= 15 V input voltage limits3...32 V discrete input logicPositive voltage state 0 guaranteed<= 5 V discrete input voltage state 1 guaranteed>= 11 V discrete input current state 0 guaranteed<= 2 mA discrete input current state 1 guaranteed>= 6 mA discrete input input overvoltage protection45 V 10 s discrete input input resistance> 1 MOhm analogue input circuit output load>= 2 kOhm 0...10 V analogue output conversion time<= 0.75 ms analogue input circuit1.2 ms analogue output conversion error0,002 0...10 V 77 °F (25 °C) analogue input circuit+/- 0.4 % 0...10 V 77 °F (25 °C) analogue output fail stateHold analogue outputReset to zero analogue output discrete output typeTransistor discrete output logicPositive discrete output current2 A per group2 A per module0.25 A per point leakage current< 0.4 mA DC 30 V discrete output voltage drop< 0.4 V 0.25 A at state on discrete output surge current2.5 A 1 ms discrete output response time1.05 ms from state 1 to state 0 discrete output1.2 ms from state 0 to state 1 discrete input1.2 ms from state 0 to state 1 discrete output1.2 ms from state 1 to state 0 discrete input isolation voltage500 V 1 min between analogue I/O and operating voltage500 V 1 min between operating voltage and I/O from ground power dissipation in W<= 6 W markingCE local signalling4 LEDs channel status electrical connection2 connectors for removable terminal blocks current consumption400 mA 24 V DC depth1.87 in (47.5 mm) height4.92 in (125 mm) width5.57 in (141.5 mm) product weight0.53 lb(US) (0.24 kg) Environment product certificationsCSAUL protective treatmentTC resistance to electrostatic discharge4 kV contact IEC 801-28 kV on air IEC 801-2 resistance to electromagnetic fields9.14 V/yd (10 V/m) 80...1000 MHz IEC 801-3 ambient air temperature for operation32...140 °F (0...60 °C) ambient air temperature for storage-40...185 °F (-40...85 °C) relative humidity95 % without condensation operating altitude<= 16404.2 ft (5000 m) Ordering and shipping details Category18206 - MOMENTUM PROCESSORS,I/O BASES,CONN. Discount SchedulePC31 GTIN00785901435150 Nbr. of units in pkg.1 Package weight(Lbs)0.84999999999999998 ReturnabilityY Country of originID Offer Sustainability Sustainable offer statusGreen Premium product RoHS (date code: YYWW) REACh Product environmental profileAvailable Product end of life instructionsAvailable California proposition 65WARNING: This product can expose you to chemicals including: - - - - - - - Substance 1Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. - - - - - - - More informationFor more information go to www.p65warnings.ca.gov Contractual warranty Warranty period18 months
Documents and DownloadsLanguage
No results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Dimensions DrawingsStandard Adapter on a Typical BaseDimensions
Mounting and ClearanceMounting on a Wall
Connections and SchemaExternal Wiring DiagramsDiscrete I/O DevicesF1, F31 A fuseF22.5 A fuseAnalog I/O DevicesF31 A fuseInternal Pin Connections
Rows 2 and 3 show the internal connections between terminals on the I/O base. Rows 4 through 6 show the internal connections on the optional busbar.
NOTE: AGND and DGND are separated inside the module. External digital inputs must be returned to the DGND terminal. External analog circuits must be returned to AGND terminals.