discrete I/O module Modicon Quantum - 4 I - 125 V DC - 4 OShow more characteristics >
Product availabilityNon-Stock - Not normally stocked in distribution facility
Main range of productModicon Quantum automation platform product or component typeMixed discrete I/O module discrete I/O number8 Complementary discrete input number4 1 group of 8 discrete input logicSink addressing requirement1 output word1 input word network frequency limits47...63 Hz discrete input voltage125 V DC input voltage limits156.2 V including ripple voltage state 0 guaranteed0...36 V voltage state 1 guaranteed88...156.2 V current state 0 guaranteed<= 1.2 mA current state 1 guaranteed>= 2 mA response time0.5 or 1.5 ms depending on the filter at state 0 to state 10.5 or 1.5 ms depending on the filter at state 1 to state 0 discrete output number4 1 group of 4 discrete output typeSolid state, isolated discrete output logicSource or sink discrete output voltage24...125 V output voltage limits19.2...156.2 V DC typical maximum load current<= 16 A per module<= 4 A per point voltage drop0.75 V 4 A absolute maximum output30 A during 500 ms per point load capacitance<= 0.1 µF 150 V DC<= 0.6 µF 24 V DC leakage current1.2 mA 150 V DC protection typeInternal output protection by 5 A fuse per groupOn input by resistor limitedOn output by transient voltage suppression associated fuse rating5 A isolation between group of I/O channels1780 Vrms for 1 minute isolation between group and bus2500 Vrms for 1 minute isolation between channels1780 Vrms for 1 minute fault indicationOvercurrent on output power dissipation0.4 W + (1 x input point on) + (0.75 total output load current) local signalling1 LED green bus communication is present (Active)1 LED red no voltage in output and input (F)2 LEDs red fault detected on the output point4 LEDs green output is turned on4 LEDs red fault detected on the input point markingCE bus current requirement350 mA product weight0.66 lb(US) (0.3 kg) Environment resistance to electrostatic discharge4 kV contact conforming to IEC 801-28 kV on air conforming to IEC 801-2 resistance to electromagnetic fields9.14 V/yd (10 V/m) 80...1000 MHz conforming to IEC 801-3 ambient air temperature for operation32...140 °F (0...60 °C) ambient air temperature for storage-40...185 °F (-40...85 °C) relative humidity95 % without condensation operating altitude<= 16404.2 ft (5000 m) protective treatmentConformal coating Humiseal 1A33 standardsFM Class 1 Division 2CSA C22.2 No 142UL 508 product certificationsCUL Ordering and shipping details Category18155 - QUANTUM I/O & POWER SUPPLIES Discount SchedulePC21 GTIN00785901620594 Nbr. of units in pkg.1 Package weight(Lbs)2.21 ReturnabilityN Country of originCN Offer Sustainability California proposition 65WARNING: This product can expose you to chemicals including: - - - - - - - Substance 1Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. - - - - - - - Substance 20 - - - - - - - More informationFor more information go to www.p65warnings.ca.gov Contractual warranty Warranty period18 months
Documents and DownloadsLanguage
CatalogSizeAdd to My DocumentsUser guideSizeAdd to My DocumentsCADSizeAdd to My DocumentsCAD for 140DDM69000C: discrete I/O module Modicon Quantum - 4 I - 125 V DC - 4 O (Version 1.0)
No results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Dimensions DrawingsRacks for Modules MountingDimensions of Modules and Racks(1)2 slots(2)3 slots(3)4 slots(4)6 slots(5)10 slots(6)16 slots
Connections and Schema125 Vdc Discrete Input/High Power Output ModuleWiring DiagramN/CNot Connected