power supply module Modicon Quantum - 48..60 V DC - redundantShow more characteristics >
Product availabilityNon-Stock - Not normally stocked in distribution facility
Main range of productModicon Quantum automation platform product or component typePower supply module power supply typeRedundant Complementary input voltage48...60 V DC 48...60 V input current<= 3800 mA inrush current14 A 40 V input power interruption13 ms 48 V associated fuse rating2 A time-lag output voltage5.1 V DC power supply output current8 A redundant output overvoltage protectionInternal output overload protectionInternal power dissipation17.2 W alarm output1 NC 6 A 220 V power supply fault local signalling1 LED green power (PWR OK) markingCE module formatStandard product weight1.43 lb(US) (0.65 kg) Environment standardsCSA C22.2 No 142UL 508 product certificationsCUL resistance to electrostatic discharge4 kV contact conforming to IEC 801-28 kV on air conforming to IEC 801-2 resistance to electromagnetic fields9.14 V/yd (10 V/m) 80...2000 MHz conforming to IEC 801-3 ambient air temperature for operation32...140 °F (0...60 °C) ambient air temperature for storage-40...185 °F (-40...85 °C) relative humidity95 % without condensation operating altitude<= 16404.2 ft (5000 m) Ordering and shipping details Category18155 - QUANTUM I/O & POWER SUPPLIES Discount SchedulePC21 GTIN00785901169864 Nbr. of units in pkg.1 Package weight(Lbs)2.21 ReturnabilityN Country of originCN Offer Sustainability Sustainable offer statusGreen Premium product RoHS (date code: YYWW) REACh Product environmental profileAvailable Product end of life instructionsAvailable California proposition 65WARNING: This product can expose you to chemicals including: - - - - - - - Substance 1Lead and lead compounds which is known to the State of California to cause cancer and birth defects or other reproductive harm. - - - - - - - More informationFor more information go to www.p65warnings.ca.gov Contractual warranty Warranty period18 months
Documents and DownloadsLanguage
CatalogSizeAdd to My DocumentsUser guideSizeAdd to My DocumentsCADSizeAdd to My DocumentsCertificateSizeAdd to My Documents
No results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Dimensions DrawingsRacks for Modules MountingDimensions of Modules and Racks(1)2 slots(2)3 slots(3)4 slots(4)6 slots(5)10 slots(6)16 slots
Connections and Schema48 Vdc/8 A Redundant Power Supply ModuleWiring Diagram
NOTE: A normally closed relay contact rated at 220 Vac, 6A / 30 Vdc, 5A is available on terminals 1 and 2 of the power terminal strip. This contact set may be used to signal input power OFF, or a power supply failure.Operating Curve and Hold-up Capacitor Timing Chart
NOTE: Tolerance to input interruptions may be increased by adding a ≥ 80 Vdc electrolytic capacitor between 5 and 6 of the power terminal strip. Refer to the hold-up capacitor timing chart (above) for capacitor values.