Technical FAQs

Ask a Question

ATV680 does the drive show the Frequency Reference in idle state?

Issue:
ATV680 does the drive show the Frequency Reference in idle state?

Product:
ATV6xx ATV9xx

Environment:
All serial numbers

Cause:
ATV680 pump off  and the drive is in the rdy state.

Resolution:
Yes, the drive default will the display the frequency reference, unless otherwise modified by customer to show output frequency or motor current which would show 0.0 in idle state. If the drive is left at default to show Frequency Reference and shows 0.0, if analog, correct or remove and inspect the analog input signal. 

 
Was this helpful?
What can we do to improve the information ?