Technical FAQs

Ask a Question

How to establish communication using the scadapack32 with the Meter using CO2WAG?

After enabling the CO2WAG license and loading the CO2WAG C/C++ program, the meter ID, slave ID and Master serial port must be defined to establish communication with the Meter.
Using the scadapack 32 Telepace Studio template program 5232 io5601 RUN1-14.tpj. Its located under C:\Program Files (x86)\Schneider Electric\CO2WAG\TelePACE Files.
Go online with the scadapack 32 RTU device then select COMM under the register editor. Enter the proper Meter ID, Slave ID and the Master serial port to be use.

Was this helpful?
What can we do to improve the information ?