Technical FAQs

Ask a Question

Can the MP Meter-Pak Meter Center catalog numbers have additional meter sockets added to them?

Expanded Service

Product Line:
MP Meter Pak Metering

Additional meter sockets

Additional tenants

No. The MP Meter-Pak meter center catalog numbers are configured as 2 to 6-Gang ONLY, Meter Socket/Tenant Breaker devices per complete enclosure and addtional meter sockets cannot be added.
Some MP Meter-Pak units are supplied with one position blanked out that gives the appearance of a potential future meter socket position. But Square D is not able to offer parts to convert the blanked out meter socket position into an active meter socket position in the field. 
For Example: If a 6th meter socket might be needed at some later date, do not order a 5-Gang device(with the 6th blanked out) thinking that the blanked out position can be added at some later date. Order the 6-Gang unit up front and the part number 29007 Closing Plate to seal off the extra position until it is needed in the future.

CTA-ID : 2044754
Was this helpful?
What can we do to improve the information ?