Technical FAQs

Ask a Question

ATV312 drive with a remote speed pot is not ramping up to full speed 60hz. 

Issue:
ATV312 drive wit a remote speed pot is not ramping up to full speed 60hz. 

Product Line:
Altivar ATV312

Environment:
All

Cause:
Pot is not putting 10vdc on the analog input AI1 when its in the fully clockwise position. 

Resolution:
Turned up his pot signal to 100% and he is only getting 8.6vdc on the AI1 input at full clockwise
Check the Pot make sure its a 1 to 10kohm.
Check the wiring make sure the wiper is on the AI1 and other two legs can wire to 10vdc and com. 
Was this helpful?
What can we do to improve the information ?