Technical FAQs

Ask a Question

What are the repair parts for a HU365SS Series E5(or E05) Heavy Duty Safety Switch?

Issue:
Current Design Repair parts

Product Line:
Heavy Duty Safety Switches

Environment:
Repair parts

Cause:
Maintenance

Resolution:
The parts listed here are the only field replaceable parts.

Line base assembly - 4055218951 (3-required and the arc suppressor is included with each line base assembly)
Arc suppressor assembly - 4051270850 (3-required)  
Line base lug assembly - 4025113650 (2 required per line base assembly. 1-for line & 1-for load)
Line base lug mounting screw - 2140128481 (1/2"-13 x 1.5 inch one per lug)
Line base lug mounting nut - 2342702800 (1/2"-13 Keps nut one per lug)
Line base phase insulator - 4055219301 (2 required)  
Line base mounting screws - 4020600901 (2 required per line base assembly)  
Switch Operating Handle assembly - 4051219151
Mounting screws and washers for Switch Operating Handle - 2140122242(Mtg Screw - 2 required) and 2370100220(washer - 2 required) 
Handle knob kit - 4028343550 (the black & red knob at the end of the handle)
Cross bar insulators - 4055217701( 2 required the part is approximately 4.19inches long x 2.5inches tall)
Cross bar insulator(middle) - 4055217801 (1 required part is approximately 8.85 inches long)
Dust Shield - 4055215701 (1 required approximately 16.1 inches long x 1.16 inches wide and flat)
Door thumb screws - S1A99898 (2 required)
Door thumb screw retainers - 4405043301 ( 2 required)
Was this helpful?
What can we do to improve the information ?