Start here for access to our Knowledge Base to get answers to over one hundred thousand questions online in seconds.Find Answers
...See what we've been doing in some of our major markets.Find your Location
Access tailored services, 24/7 self-service and expert help. Anywhere, anytime, any project.Discover now
Everything you need to know about our IoT technology backbone.Learn more
Where is the 0-10vdc signal landed on the ATV32, ATV312, ATV61 and ATV71 drives?
ATV61, ATV71, ATV31, ATV312, ATV32
All serial numbers Open style VFDs
Needs to wire in a 0-10vdc signal for speed control.
ATV32, ATV61 and ATV71 drives you can wire the 0 to 10vdc signal to AI1+ to com as reference speed 1 and you can program AI2 in menu the IO menu to set up AI2 as a 0 to 10vdc speed reference 2.
Please note that there is a factory installed jumper between AI- and com that allows this input to work with a 0 to10vdc input. If you remove the jumper then it becomes an -10vdc to +10vdc input.
ATV312 the 0-10vdc signal is landed on AI1 only.