Technical FAQs

Ask a Question

What is the default IP address for Powerlink NF3000G3 controller?

Issue:
When searching for Schneider Electric Powerlink US products information for a new or existing installation, assistance is available using online tools and local authorized distributors.

Product Line:
Schneider Electric Powerlink US Lighting Control products

Environment:
Powerlink NF2000G3, NF3000G3, and NF3000G3C

Cause:
Each NF2000G3,  NF3000G3, and NF3000G3C are loaded with a factory default IP address.

Resolution:
Each NF2000G3, NF3000G3, and NF3000G3C are loaded with a factory default IP address of 10.10.10.10.

For help when searching for additional Powerlink product documentation, use the following links:


(1) Our Product web site, at this link.
http://m.lightingcontrol.schneider-electric.com/

(2) Our Online Digest, at this link, shows specific catalog numbers of many of our products.
www.schneider-electric.us/sites/us/en/support/product-support-resources/online-catalog.page

(3) Further assistance is available from a local authorized Schneider Electric Distributor, using our Distributor Locator at the below link:
www.schneider-electric.us/sites/us/en/support/distributor-locator/power-industry-locator.page

All the above tools may be found by visiting our US Home Page.
www.schneider-electric.com/site/home/index.cfm/us/
Was this helpful?
What can we do to improve the information ?