Technical FAQs

Ask a Question

What cable is used to connect Powerlink to Novar NSD/M1 Controller?

Issue:
What cable is used to connect Powerlink to Novar NSD/M1 Controller?

Product Line:
Powerlink G3 Controllers

Environment:
Commercial Buildings using Novar system to control Powerlink.  Typically, large national account retail store buildings

Cause:
This special cable connects Novar NSD/M1 controller to the Powerlink Power Supply 8 pin connector that normally connects to the controller.  In this configuration, there is no Powerlink G3 Controller.  Novar system communicates directly to the control buses via the power supply.

Resolution:
The part numbers are:
63249-406-03 = 6ft cable
63249-406-04 = 10 ft cable
Was this helpful?
What can we do to improve the information ?