Start here for access to our Knowledge Base to get answers to over one hundred thousand questions online in seconds.Find Answers
...See what we've been doing in some of our major markets.Find your Location
Access tailored services, 24/7 self-service and expert help. Anywhere, anytime, any project.Discover now
Everything you need to know about our IoT technology backbone.Learn more
Need to read the encoder count over a serial communication network.
ATV71 with optional encoder card installed
All ATV71 models, all serial numbers that have an optional encoder card installed
How do you read the encoder pulse count through a network?
Code: PUC Logic address: 5611, Can Index:201A/C, INTERBUS index:5FB9/41, DeviceNet path:7D/01/0C
Type: Unit R/W: Read only Unit: value 1 per count
PUC (logic address 5611) is initialized to the value 0 when the drive is powered on. Every ms this parameter increases or decreases according to the direction of rotation (forward or reverse).
It is a 16 bits register and is not signed, that is to say when 65535 is reached, it goes back to 0.
It is not possible to write this parameter.
There is no detection of overflow