Start here for access to our Knowledge Base to get answers to over one hundred thousand questions online in seconds.Find Answers
...See what we've been doing in some of our major markets.Find your Location
Access tailored services, 24/7 self-service and expert help. Anywhere, anytime, any project.Discover now
Everything you need to know about our IoT technology backbone.Learn more
Can you copy an ATV31 drives program into the new ATV312 drive?
Altivar ATV312, ATV31
Needs to use the old file from his ATV31 and put that program into his new ATV312 drive.
Yes, you can copy the old ATV31 file into the new ATV312 drive.
You will need to set up your new ATV312 to act like a old ATV31 by setting the ArE parameter to 31E or 31A.
The differences are as follows.
31A has the knob on the face of the old ATV31 drive.
31E does not have the knob only the 4 buttons on the face of the drive.
To copy the old program from the ATV31 into the new ATV312 drive you will need the original ATV31 remote keypad, Powersuite software V2.6 or the Multiloader.
See the attached pdf document for notes.