Technical FAQs

Ask a Question

What are the repair parts for the DTU363DS, series F6? (may be shown as F06)

The repair parts for the DTU363DS, series F6 (F06) are as follows. No other parts are available.
-Line Base - 40566-247-50 (one each upper and lower. Order arc suppressor, load lugs, and wire assembly separately).
-Line Base mounting screws - 40205-151-01 (requires 3 per line base).
-Arc Suppressor Assembly - 40566-355-50 (requires 1 per line base).
-Arc Suppressor mounting screw - 40205-145-01 (requires 1 per arc suppressor).
-Wire Assembly- 40567-800-50 (For A & B phase only. Includes cable factory connected mechanical lug at one end and at other end a crimped connector. Use mounting screws of line and load lugs.)
-Wire assembly-40567-800-51 (For C phase only. Includes cable factory connected mechanical lug at one end and at the other end a crimped connector. Use mounting screws of line and load lugs)
-Line and Load Lug Assembly - 40251-018-51(requires 6 lugs total, 3 per base assembly)
-Line and Load Lug mounting screw - 40205-142-02(requires one per lug)
-Ground Lug(s) - 40251-018-51 (per lug).
-Ground Lug mounting screw - 40205-135-03 (one per ground lug)
-Switch Mechanism - 40566-469-50 (each for upper and lower).
-Linkage Assembly - 40566-653-50 (links together upper and lower switch mechanisms).
-Linkage Assembly mounting screws that go into the side of the enclosure- 21949-000-01 (requires 3) Also replace the mounting screw rubber gaskets.
-Linkage Assembly mounting screw rubber Gaskets - 40503-228-02 (3 total required)
-Linkage Assembly mounting screw that go into the back mounting pan inside the switch - 21422-171-01 (4 required, no gaskets required)
- Handle - 40566-888-50
-Lockplate - 40566-895-01
-Lockplate mounting screws - 21949-000-01 (requires 2 and requires rubber gasket)
-lockplatet mounting screw rubber gasket - 40503-228-02




CTA-ID : 2055214
Was this helpful?
What can we do to improve the information ?