Technical FAQs

Ask a Question

What Meter Socket Closing Plates are available for unused EZM meter socket positions?

Issue:
Selection

Product Line:
EZM Accessory

Cause:
Selection of closing plate

Resolution:
Use Meter Socket Closing Plate Catalog Number: 29007 for Branch Units starting with Catalog Number Prefix:
EZM (125A Max. and 225A Max.) Ring Style Branch Units having 2-Pole Tenant Circuit Breakers
EZMR (125A Max. and 225A Max.) Ringless Style Branch Units having 2-Pole Tenant Circuit Breakers
EZMH (125A Max. and 225A Max.) Ringless Style Horn Bypass Branch Units having 2-Pole Tenant Circuit Breakers
EZMT (225A Max.) Ring Style Test Block Bypass Branch Units having 2-Pole, or 3-Pole Tenant Circuit Breakers

Use Meter Socket Closing Plate Catalog Number: RSG4 for Branch Units starting with Catalog Number Prefix:
EZMR (125A Max. and 225A Max.) Ringless Style Branch Units having 2-Pole, or 3-Pole Tenant Circuit Breakers
EZML (125A Max., 225A Max. and 400A Max.) Ringless Style Lever Bypass Branch Units having 2-Pole , or 3-Pole Tenant Circuit Breakers

NOTE: Ringless Style EZMK (400A Max.) Branch Units having 2-Pole, or 3-Pole Tenant Circuit Breakers require use on Bolt-On Meters are supplied with a Three Position Ringless Style Meter Socket Cover that includes: ``In Service`` with meter installed, ``Out of Service`` with meter installed, and ``Out of Service`` with meter removed. A Single Sliding Type Ringless Meter Socket Cover is provided with each Bolt-On Meter Socket Position for Branch Units having 2-Pole or 3-Pole Tenant Circuit Breakers.


CTA-ID : 15623
Was this helpful?
What can we do to improve the information ?