Technical FAQs

Ask a Question

What does ``LD`` stand for on a proximity sensor?

The ``LD`` on the end of the sensor part number means the sensor has a 0.8 meter (2.6 ft) pigtail on the end of the sensor which then terminates to a 4-pin M12 DC Micro connector. This is wired to the IEC normal:
BRN = pin 1 = V+
BLU = pin 3 = V common and BLK = pin 4 = output

CTA-ID : 2033128
Was this helpful?
What can we do to improve the information ?