Technical FAQs

Ask a Question

What are the universal baseplates for?

They are mounting plates designed to be used to retrofit Square D Class 8536 Type S (sizes 00, 0, 1, 2, 3 & 4) starters into an application which is currently using a competitive NEMA starter. It is a metal plate which attaches to the panel in the location of the starter to be replaced. The Type S starter then mounts to the baseplate. Select from the table below based on competitive starter being replaced.

Allen Bradley 509 0, 1 9998UB01
Allen Bradley 709 1 9998UB01
Cutler Hammer Freedom 00, 0, 1 9998UB01
Furnas ESP100 0, 1 9998UB01
Furnas INNOVA 0, 1 9998UB01
General Electric CR306 00, 0, 1 9998UB01
Telemecanique A ? Line 0, 1 9998UB11
Square D Pre-Type S 00, 0, 1 9998UB11

Allen Bradley 509 2 9998UB02
Allen Bradley 709 2 9998UB02
Cutler Hammer Freedom 2 9998UB02
Furnas ESP100 2 9998UB02
Furnas INNOVA 2 9998UB02
General Electric CR306 2 9998UB02
Telemecanique A ? Line 2 9998UB12
Square D Pre-Type S 2 9998UB12

Allen Bradley 509 3 9998UB03
Allen Bradley 709 3 9998UB03
Cutler Hammer Freedom 3 9998UB03
Furnas ESP100 3 9998UB03
Furnas INNOVA 3 9998UB03
General Electric CR306 3 9998UB03
Telemecanique A ? Line 3 9998UB13
Square D Pre-Type S 3 9998UB13

Allen Bradley 509 4 9998UB04
Allen Bradley 709 4 9998UB04
Cutler Hammer Freedom 4 9998UB04
Furnas ESP100 4 9998UB04
Furnas INNOVA 4 9998UB04
General Electric CR306 4 9998UB04
Telemecanique A ? Line 4 9998UB14
Square D Pre-Type S 4 9998UB14



CTA-ID : 2022325
Was this helpful?
What can we do to improve the information ?